Miller Enterprises
Miller Enterprises 056193 Inlet Guide V & U-Grooved V-Knurled Welding
V- and U-grooved inlet guide feeds flux-cored or solid wire up to 0.052 in for Millermatic and Multimatic welders
- TypeTools
- Guides wire smoothly with V and U-grooved V-knurled inlet
- Handles solid and flux-cored wire up to .052 in diameter
- Fits Millermatic 200 210 212 250 251 252 300 350 350P DVI Pulser Vintage
- Compatible with Multimatic 200 215 220 AC/DC 255 welders
- Genuine Miller Electric replacement part number 056193
Miller 056193 Inlet Guide — 0.052 in wire
The Miller Electric 056193 inlet guide fits Millermatic and Multimatic welders including the 200, 210, 212, 250, 251, 252, 300, 350, 350P, DVI, Pulser, Vintage, 215, 220 AC/DC and 255 series. It accepts flux-cored and solid wire up to 0.052 in diameter and works with both 2-roll and 4-roll drive systems.
For MIG operators using listed Millermatic
Welders running the compatible Millermatic or Multimatic machines can install this guide to match 0.052 in wire. Shops that use larger-diameter wire, different drive-roll configurations or non-Miller feeders will need a different inlet guide.
Maximum wire diameter 0.052 in
The 0.052 in limit is the single specification that determines fit. If your wire exceeds this size the guide cannot feed it; if your wire is smaller the guide will still function but a guide sized for the smaller diameter may improve tracking.
Highlights
- Guides wire smoothly with V and U-grooved V-knurled inlet
- Handles solid and flux-cored wire up to .052 in diameter
- Fits Millermatic 200 210 212 250 251 252 300 350 350P DVI Pulser Vintage
- Compatible with Multimatic 200 215 220 AC/DC 255 welders
- Genuine Miller Electric replacement part number 056193
Specifications
| Brand | MILLER ELECTRIC |
|---|---|
| Type | Tools |
Questions about this item
Does the 056193 inlet guide include mounting hardware or must that be purchased separately?
The part is supplied as the inlet wire guide only; mounting hardware is not included and must be sourced separately.
How do I decide between the V-groove, U-groove and V-knurled profiles on the 056193?
Choose V-groove for solid wire up to 0.052 in, U-groove for flux-cored wire, and V-knurled when extra grip on flux-cored wire is needed.
What does the 0.052 in maximum wire diameter mean when the guide is fitted to a Millermatic 252?
It means the guide will reliably feed solid or flux-cored wire up to 0.052 in diameter on that model.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213554BTC
In stock