We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 35 lb pail of synthetic gear oil 220 ISO 90W SAE

Miles Lubricants

Miles Lubricants MSF1406003 220 ISO 90W SAE hvac control

SKU CH-FXYH-5790F

Synthetic gear oil rated ISO 220 and SAE 90W, meeting AGMA 9005 and DIN 51517 standards for gear, bearing and circulating systems

  • ColorYellow
  • ISO 220 viscosity matches heavy-duty gear requirements
  • Synthetic base oil performs from -43 °F to 195 °F
  • Meets AGMA 9005, DIN 51517 and U.S. Steel 224
  • 35 lb pail supplies gear, bearing and circulating systems
  • High 113 viscosity index maintains film strength across temperatures

Industrial Gear Lubricant

Miles Lubricants MSF1406003 is a synthetic gear oil rated ISO VG 220 and SAE 90W. It is formulated for gear, bearing and circulating systems in industrial and heavy-duty mobile equipment. The product meets U. S. Steel 224, AGMA 9005 and DIN 51517 Part 1, 2, 4 specifications for reliable lubrication performance.

Sustained Load Behaviour

With a viscosity index of 113 the oil maintains film strength across a wide temperature range. It operates from minus 43 degrees F pour point up to a maximum operating temperature of 195 degrees F. A flash point of 271 degrees F and no-additive synthetic base provide consistent protection during continuous duty cycles without viscosity breakdown.

Viscosity Grade Decides Fit

The single specification that determines suitability is the ISO VG 220 viscosity grade matched to SAE 90W. Equipment manuals requiring this exact grade will be served; systems specifying a different ISO or SAE grade will not. Always verify the required viscosity against the manufacturer recommendation before selecting this lubricant.

Highlights

  • ISO 220 viscosity matches heavy-duty gear requirements
  • Synthetic base oil performs from -43 °F to 195 °F
  • Meets AGMA 9005, DIN 51517 and U.S. Steel 224
  • 35 lb pail supplies gear, bearing and circulating systems
  • High 113 viscosity index maintains film strength across temperatures

Specifications

BrandMILES LUBRICANTS
ColorYellow

Questions about this item

How does the 271-degree flash point affect safety during continuous high-temperature operation?

The 271-degree F flash point indicates the oil resists ignition well above the 195-degree F maximum operating temperature, providing a wide safety margin for all-day gear and bearing lubrication.

Which equipment specifications must match the AGMA 9005 and DIN 51517 Part 1, 2, 4 standards listed for this gear oil?

Your gearboxes, bearings or circulating systems should specify compliance with AGMA 9005 and DIN 51517 Parts 1, 2 and 4 to ensure correct viscosity and additive compatibility with this ISO 220, 90W SAE synthetic fluid.

Will the -43-degree F pour point allow this synthetic gear oil to flow in older machinery during cold starts?

Yes, the -43-degree F pour point means the oil remains fluid at very low temperatures, so older gear sets and circulating pumps receive lubrication quickly even after extended shutdown in freezing conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.