We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow plastic jug of synthetic gear oil, 25 lb container

Miles Lubricants

Miles Lubricants MSF1403005 HVAC Control Yellow 68 ISO 80W SAE

SKU CH-K0K2-96DBY

Yellow synthetic gear oil rated ISO 68 and SAE 80W for gear, bearing and circulating systems

  • ColorYellow
  • Synthetic base oil resists breakdown
  • ISO 68 viscosity suits heavy-duty gear systems
  • Operates from -15 °F to 195 °F
  • Meets AGMA 9005 and DIN 51517 standards
  • Low -49 °F pour point aids cold starts

HVAC Gear Oil – ISO 68, SAE 80W

This synthetic gear oil carries ISO viscosity grade 68 and SAE grade 80W for gear, bearing and circulating systems. The yellow fluid meets U. S. Steel 224, AGMA 9005 and DIN 51517 Parts 1, 2, 4. It operates from minus 15 to 195 degrees Fahrenheit with a viscosity index of 119.

Verify system requirements before ordering

Confirm that your equipment specifies ISO 68 viscosity and SAE 80W grade for the intended gear or circulating application. Check that the operating temperature range of minus 15 to 195 degrees Fahrenheit matches the service environment. Ensure the OEM approves lubricants meeting U. S. Steel 224, AGMA 9005 and DIN 51517 standards.

Synthetic base with no additives

The synthetic base oil contains no additives and delivers a flash point of 450 degrees Fahrenheit and a pour point of minus 49 degrees Fahrenheit. Supplied in a yellow 25‑pound bottle, it is suited for gear, bearing and circulating systems where the listed standards apply. Buyers needing NSF‑rated lubricants or specific Timken OK Load values should select a different product.

Highlights

  • Synthetic base oil resists breakdown
  • ISO 68 viscosity suits heavy-duty gear systems
  • Operates from -15 °F to 195 °F
  • Meets AGMA 9005 and DIN 51517 standards
  • Low -49 °F pour point aids cold starts

Specifications

BrandMILES LUBRICANTS
ColorYellow

Questions about this item

What comes in the jug and is any extra hardware needed?

The 1-gallon jug contains 25 lb of yellow synthetic gear oil rated ISO 68 and SAE 80W; no additional hardware or additives are required.

How do I choose between the ISO 68 and SAE 80W ratings on the same jug?

Both ratings describe the same fluid — ISO 68 for industrial specs and SAE 80W for automotive specs — so one jug satisfies either requirement.

What does the 119 viscosity index mean when the oil is running in a gearbox?

A viscosity index of 119 indicates the oil resists thinning at the 195 °F maximum operating temperature and stays pumpable down to the -15 °F minimum.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.