We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 35 lb pail of ISO 46 synthetic HVAC gear oil

Miles Lubricants

Miles Lubricants MSF1302003 HVAC Control Yellow 46 ISO Viscosity 35 lb

SKU CH-GGJ8-S1KPG

ISO VG 46 synthetic hydraulic oil in a 35 lb yellow pail, rated from -15 °F to 215 °F with a 440 °F flash point

  • ColorYellow
  • ISO 46 viscosity suits hydraulic systems
  • Synthetic base oil resists oxidation
  • Operates from -15 °F to 215 °F
  • High 440 °F flash point improves safety
  • Viscosity index 111 maintains film strength

Hydraulic Turbine Circulation Fluid

This synthetic HVAC control fluid is formulated for hydraulic, turbine and circulation systems. It delivers an ISO Viscosity Grade 46 with a Viscosity Index of 111. The product suits maintenance teams needing a single lubricant for rotating equipment operating across a wide temperature range.

Operating Window 15 to 215 Degrees

The fluid remains pumpable down to -15 degrees F and stable up to 215 degrees F. A flash point of 440 degrees F provides a wide safety margin during high-load circulation. Headroom narrows if system peaks exceed the maximum operating temperature or if ambient conditions fall below the minimum pour point.

35 lb Pail Ready to Use

The yellow 35 lb pail arrives sealed and requires no blending or additive packages. Technicians can pour directly into reservoirs without measuring supplements. The container size limits use to installations that can handle a single pail volume per service interval.

Highlights

  • ISO 46 viscosity suits hydraulic systems
  • Synthetic base oil resists oxidation
  • Operates from -15 °F to 215 °F
  • High 440 °F flash point improves safety
  • Viscosity index 111 maintains film strength

Specifications

BrandMILES LUBRICANTS
ColorYellow

Questions about this item

Will this ISO VG 46 fluid mix safely with the hydraulic oil already in my circulation system?

The product is a synthetic-base ISO VG 46 lubricant rated from -15 °F to 215 °F with a viscosity index of 111; match those figures to your system's current fluid before mixing.

How can I confirm the pail delivers the correct viscosity after I fill the reservoir?

Check that the fluid meets ISO VG 46 at 40 °C and shows a viscosity index near 111; the flash point should read about 440 °F and the pour point no higher than -15 °F.

Does the 35 lb pail include a pump or dispenser, or must I supply one?

The container is a plain pail with no pump, dispenser or additives included; you will need a separate transfer pump or drum spigot to dispense the oil.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.