We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber gear oil in a 35 lb pail

Miles Lubricants

Miles Lubricants M00600803 HVAC Control 460 ISO 140W SAE

SKU CH-0922-3MAF5

Mineral-based gear oil rated ISO 460 and SAE 140W for gear systems operating from 10 to 160 °F

  • ColorAmber
  • Ready for heavy gear loads with ISO 460 viscosity
  • Flows at low temperatures down to 10 °F pour point
  • Withstands high heat up to 440 °F flash point
  • Meets GM LS-2 and U.S. Steel 224 standards
  • Complies with AGMA 9005 and DIN 51517 specifications

Miles Lubricants M00600803 Gear Oil 460 ISO 140W SAE

This mineral-based gear oil meets ISO Viscosity Grade 460 and SAE Grade 140W specifications for heavy-duty gear systems. It is supplied in a 35 lb pail and carries an amber colour. The formulation contains no additives and is not NSF rated.

Operating Limits of Mineral Gear Oil 460 ISO 140W

The lubricant operates between a minimum of 0 Degrees F and a maximum of 160 Degrees F. Its pour point is 10 Degrees F and its flash point is 440 Degrees F. These temperatures define the practical window for reliable gear protection in service.

Installation and Common Issues

The pail container allows direct pouring or pump dispensing into gear housings. Because the oil contains no additives, it must not be mixed with additive-treated lubricants. Overfilling or underfilling the gear case is the most frequent cause of poor performance.

Highlights

  • Ready for heavy gear loads with ISO 460 viscosity
  • Flows at low temperatures down to 10 °F pour point
  • Withstands high heat up to 440 °F flash point
  • Meets GM LS-2 and U.S. Steel 224 standards
  • Complies with AGMA 9005 and DIN 51517 specifications

Specifications

BrandMILES LUBRICANTS
ColorAmber

Questions about this item

Should I choose the 35 lb pail or the 5 gal container for my gear system?

Both descriptions refer to the same package; the product ships as a single 35 lb pail.

What does the ISO 460 viscosity mean when the oil is running in my gearbox?

It indicates a high-viscosity mineral gear oil rated for operating temperatures between 0 °F and 160 °F.

Which standards does this oil meet and what do they limit in practice?

It meets GM LS-2, U.S. Steel 224, AGMA 9005 and DIN 51517 Parts 1–3, covering industrial gear lubrication requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.