We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular network switch with multiple ports on front panel

Mikrotik

Mikrotik CSS610-1Gi-7R-2S+OUT network switch

SKU CH-QZ0C-G5T8N

Outdoor network switch with eight ports and 2.2200 kg weight, listed 2023

  • Weight2.2200
  • Cloud Smart Switch for managed networking
  • 11 ports including 2 SFP+ uplinks
  • Passive cooling for silent operation
  • 2200 kg lightweight design for easy mounting
  • First listed April 2023 with current firmware support

Mikrotik CSS610-1GI-7R-2S+OUT Smart Switch

The Mikrotik CSS610-1GI-7R-2S+OUT is a new Cloud Smart Switch designed for wired networking. It runs the SwOS operating system for layer 2 management. The unit weighs 2.2200 kg and was first listed by the manufacturer in 2023.

Who This Suits

This switch suits installers who need a managed switch with a mix of copper and fibre interfaces for small business or campus edge deployments. It is not for buyers who require Power over Ethernet on the downlink ports. It is also not for environments that demand layer 3 routing features such as static routing or VRRP.

Deciding Specification

The defining specification is the SwOS operating system, which provides VLAN, port isolation, link aggregation and ACLs without a full RouterOS licence. If your design needs RouterOS scripting or layer 3 forwarding, this is not the correct part.

Highlights

  • Cloud Smart Switch for managed networking
  • 11 ports including 2 SFP+ uplinks
  • Passive cooling for silent operation
  • 2200 kg lightweight design for easy mounting
  • First listed April 2023 with current firmware support

Specifications

BrandMikroTik
ModelCSS610-1GI-7R-2S+OUT
Weight2.2200

Questions about this item

What mounting options suit the 2.2200 kg CSS610-1GI-7R-2S+OUT?

The 2.2200 kg CSS610-1GI-7R-2S+OUT can be secured with standard rack ears or wall-mount brackets designed for switches of this weight; verify the bracket kit matches the chassis hole pattern before drilling.

Which cable sequence avoids a port-negotiation fault on the CSS610-1GI-7R-2S+OUT?

Power the CSS610-1GI-7R-2S+OUT first, then insert the 1G copper link, and finally the two SFP+ fibres; reversing this order can leave the SFP+ ports in a down state until a reboot.

When should the passive cooling path of the CSS610-1GI-7R-2S+OUT be cleaned?

Inspect the CSS610-1GI-7R-2S+OUT vents every six months and blow out dust with low-pressure air; a clogged airflow path raises internal temperature and shortens component life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.