We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated 12V solenoid relay with copper contacts and bracket mounting

Meterk 12V 1114208 300A Continuous Duty Solenoid Relay

SKU CH-0T8X-F6Z7P

A 12 V SPST continuous-duty solenoid relay rated for 300 A with nickel-plated cover and potted coil for vibration resistance

  • Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
  • 300 A continuous current for heavy-duty winch and marine use
  • 12 VDC coil with 10.2 W power draw and 14 Ω resistance
  • SPST normally-open design gives simple on-off control
  • Nickel-plated cover resists corrosion in harsh environments
  • Potted coil interior withstands vibration and moisture

Meterk 12V 300A Continuous Duty Solenoid Relay

The Meterk 12V 1114208 is a nickel-plated SPST relay rated for 300 A continuous duty. It uses a normally open contact configuration with a single off-on circuit. The unit replaces multiple OEM part numbers across golf cart, winch and marine applications.

12 VDC coil limits and contact behaviour

The coil draws 10.2 W at 14 Ω resistance and is wound with 180 copper wire. Contacts are normally open and rated for a maximum transient current of 300 A. The potted coil interior provides vibration resistance, while the nickel-plated cover helps prevent corrosion in harsh environments.

Bracket mounting and fitment checks before ordering

Verify the straight bracket mounting holes measure 5/16 by 19/32 inches on a 2-13/64 inch centre spacing. Confirm your system requires a 12 VDC SPST normally open relay with a single circuit. Ensure the continuous 300 A rating matches the load profile of the intended winch, golf cart or marine circuit.

Highlights

  • 300 A continuous current for heavy-duty winch and marine use
  • 12 VDC coil with 10.2 W power draw and 14 Ω resistance
  • SPST normally-open design gives simple on-off control
  • Nickel-plated cover resists corrosion in harsh environments
  • Potted coil interior withstands vibration and moisture

Specifications

Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
BrandMeterk
Part Number12V 1114208

Questions about this item

Which version of the Meterk 12V 1114208 solenoid relay should I choose for a 12 VDC system needing 300 A continuous duty?

This model is a single 12 VDC SPST normally-open relay rated for 300 A continuous current with a nickel-plated cover and potted coil for vibration resistance.

What does the 300 A continuous rating mean once the relay is installed in a winch or golf-cart circuit?

The contacts can carry 300 A continuously at 12 VDC without overheating, and the transient capability reaches the same 300 A peak during motor inrush.

How does the SPST normally-open interface limit the way I wire this relay in a 12 VDC control circuit?

The single-pole single-throw normally-open contacts close only when the 12 VDC coil is energised; the 14 Ω coil draws 10.2 W, so the control circuit must supply that power to latch the relay.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.