Mag-Mate
Mag-Mate Salvage Magnet 50 Lb 6 In
A permanent rare-earth dip-tank magnet with a 50 lb pull capacity and a 5-inch head
- TypePermanent
- 50 lb magnetic pull lifts heavy ferrous parts
- Rare-earth magnet delivers strong holding force
- 6 in length reaches into deep tanks
- Fixed shaft keeps magnet aligned during use
- Permanent magnet requires no power source
Salvage Magnet 50 Lb Pull
The Mag-Mate salvage magnet is a permanent rare-earth tool built for retrieving ferrous objects from tanks, pits or hard-to-reach areas. Its 50 lb magnetic pull capacity suits maintenance crews, plumbers and hobbyists who need reliable attraction without electrical power. The fixed shaft and compact 6 in compressed length allow one-handed operation in confined spaces. It is not suited for lifting non-magnetic materials or loads exceeding the rated pull.
50 Lb Capacity And Headroom
The magnet delivers a maximum pull of 50 lb on clean, flat steel surfaces, providing enough force for typical dip-tank retrieval jobs. Performance drops quickly with air gaps, rust, paint or curved profiles, so actual holding power will be lower in most real-world conditions. The 5 in head length concentrates flux for a strong grip on suitable targets. Users needing higher breakaway force or adjustable reach will find this unit insufficient.
Fixed Shaft And Rare-Earth Design
The fixed shaft eliminates moving parts that could jam or wear out in wet or dirty environments. Rare-earth magnet material maintains permanent magnetism without batteries or external power, so the tool is always ready. No accessories or mounting hardware are included, meaning the magnet must be used as-is or adapted by the operator. Buyers who want a telescoping handle or a quick-release mechanism will need a different solution.
Highlights
- 50 lb magnetic pull lifts heavy ferrous parts
- Rare-earth magnet delivers strong holding force
- 6 in length reaches into deep tanks
- Fixed shaft keeps magnet aligned during use
- Permanent magnet requires no power source
Specifications
| Brand | Mag-Mate |
|---|---|
| Type | Permanent |
Questions about this item
Will the 50 lb pull capacity still hold if I attach the magnet to a corroded steel plate?
The 50 lb rating applies to clean, flat steel; heavy rust or paint reduces actual holding force significantly.
How can I verify the rare-earth magnet is performing at its rated strength after unpacking?
Test against a known thick steel plate; it should require roughly 50 lb of force to break away cleanly.
Does the 6 in fixed shaft come with any mounting hardware or protective cover?
The unit ships as the magnet assembly only; brackets, bolts or a keeper plate must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



