We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless-steel magnetic tie-down with L-handle and loop, 110 lb capacity

Mag-Mate

Mag-Mate MTD110R Magnetic Tie Down 110 lb

SKU CH-TX5J-Z6V66

A magnetic tie-down with an on/off handle holds up to 110 lb and operates from -302 °F to 180 °F

  • 110 lb hold secures heavy loads
  • On/Off handle releases instantly without tools
  • 304 stainless housing resists corrosion in harsh environments
  • Operates from -302 °F to 180 °F for extreme conditions
  • Compact 5 3/4 in design fits tight anchor points

Magnetic tie-down for 110 lb loads

The Mag-Mate MTD110R is a magnetic tie-down rated for a maximum load capacity of 110 lb. It uses an on/off handle to engage or release the magnetic base. The unit suits workshops, garages or transport tasks where a temporary, tool-free anchor point is needed on ferromagnetic surfaces.

On/off handle and temperature limits

The release mechanism is an L-handle that switches the magnet on or off without tools. The housing is 304 stainless steel and carbon steel. The device is rated for a minimum operating temperature of -302 degrees F and a maximum operating temperature of 180 degrees F. Magnetic holding force will only develop on clean, flat ferrous metal.

Check surface and clearance before ordering

Verify that the mounting surface is ferromagnetic, clean, flat and thick enough to carry the rated load. The magnet measures 3 in long by 2 3/4 in wide by 2 3/4 in high, and the overall unit is 5 3/4 in long by 2 3/4 in wide by 4 3/4 in high with a 1 1/8 in loop diameter. The handle extends up to 2 1/2 in when operated, so confirm clearance around the intended mounting point.

Highlights

  • 110 lb hold secures heavy loads
  • On/Off handle releases instantly without tools
  • 304 stainless housing resists corrosion in harsh environments
  • Operates from -302 °F to 180 °F for extreme conditions
  • Compact 5 3/4 in design fits tight anchor points

Specifications

BrandMAG-MATE

Questions about this item

Which Mag-Mate magnetic tie-down capacity should I choose for my load?

The MTD110R is rated for 110 lb maximum load capacity; select it when your securing task stays within that limit.

What does the 110 lb rating mean when the tie-down is on a real workpiece?

It means the magnet will hold up to 110 lb of direct pull on clean, flat ferrous steel; paint, rust, curvature or an air gap will reduce the effective hold.

How does the on/off handle interface work and what does it control?

The L-handle rotates to switch the internal magnetic circuit on for full 110 lb hold or off for zero hold, letting you position and release the 3 in × 2 3/4 in magnet without prying.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.