We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red rectangular lifting magnet with pry-off handle and bail, 1000 lb capacity

Mag-Mate

Mag-Mate CL1000 Lifting Magnet 1000 lb

SKU CH-GT4S-96HWH

Lifts flat steel up to 1000 lb with a pry-off handle and 16 in lever for easy release

  • Lifts up to 1000 lb flat steel with secure magnetic grip
  • Pry-off handle with non-marring roller releases load without surface damage
  • Activates on material as thin as 3/16 in for versatile use
  • Full 1000 lb hold achieved on 3 in thick steel plates
  • Compact 10 3/4 in overall length fits tight workspaces

Lifting Magnet 1000 lb Flat Load

The Mag-Mate CL1000 is a permanent lifting magnet rated for a maximum flat load of 1000 lb. It is built for workshops and job sites that need to move heavy steel plate or block without slings or chains. The pry-off handle with a non-marring roller allows one-person operation on clean, flat surfaces. It is not suited for lifting round stock or any load thinner than 3/16 in.

Capacity and Activation Thresholds

The magnet delivers its full 1000 lb rating only on material at least 3 in thick. Thinner plate down to 3/16 in will activate the magnet but with reduced holding force that falls off as thickness decreases. Round loads are explicitly not rated, so pipe, shafting or curved plate cannot be handled safely. The 16 in handle gives leverage for breakaway on thick sections.

Bail Dimensions for Rigging

The integral bail measures 3 in inside width by 2 7/8 in inside length. This opening determines which hooks, shackles or crane hooks can be attached directly. If your rigging hardware exceeds these dimensions, an intermediate link or adapter will be required before the magnet can be put into service.

Highlights

  • Lifts up to 1000 lb flat steel with secure magnetic grip
  • Pry-off handle with non-marring roller releases load without surface damage
  • Activates on material as thin as 3/16 in for versatile use
  • Full 1000 lb hold achieved on 3 in thick steel plates
  • Compact 10 3/4 in overall length fits tight workspaces

Specifications

BrandMAG-MATE

Questions about this item

Will the 1000 lb flat capacity magnet hold onto a steel plate I already own that is only 3/16 in thick?

Yes, the magnet activates on material as thin as 3/16 in, though maximum 1000 lb holding force requires at least 3 in thickness.

How can I confirm the pry-off handle with non-marring roller is releasing the load cleanly after I position it?

Operate the 16 in handle through a full cycle; the roller should roll freely and the magnet face should drop away from the steel without dragging.

Does the package include a lifting chain or shackle for the 3 in by 2 7/8 in bail, or must I supply my own rigging?

Only the magnet with integrated bail and 16 in handle is supplied; chain, shackle or other rigging hardware must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.