We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact manual lifting magnet with loop handle and carbon steel housing

Mag-Mate

Mag-Mate AC2201WLH Manual Lifting Magnet 93 lb

SKU CH-PX66-E66SE

Manual lifting magnet holds up to 93 lb with ceramic magnet and carbon-steel housing

  • 93 lb lifting capacity for secure material handling
  • manual pry release gives full control over load detachment
  • ceramic magnet core maintains grip from -302 °F to 300 °F
  • carbon steel housing resists impact and daily workshop wear
  • compact 5 1/4 in loop handle fits tight workspaces

What this manual lifting magnet does

The Mag-Mate AC2201WLH is a hand-operated lifting magnet rated for a maximum load capacity of 93 lb. It uses a ceramic magnet housed in carbon steel and a loop handle with a manual pry release. The unit measures 5 1/4 in long, 1 7/8 in wide and 2 3/4 in high overall. It is built for workshops and job sites that need to move ferromagnetic parts without slings or clamps.

Sustained load behaviour and temperature range

The magnet holds its rated 93 lb continuously while the load remains flat, clean and in full contact with the pole faces. Performance does not degrade during extended lifts because the ceramic magnet has no electrical supply to overheat. The assembly is rated for operating temperatures from -302 °F up to 300 °F, so it remains functional in extreme cold or near hot metal without loss of holding force.

Deciding specification: 93 lb maximum load capacity

The single figure that determines suitability is the 93 lb maximum load capacity. If the workpiece exceeds this weight, or if the contact surface is rough, painted, thin or non-ferrous, the magnet will not achieve a safe hold. Buyers who need to lift heavier plates, round bars or loads with an air gap must select a higher-capacity model.

Highlights

  • 93 lb lifting capacity for secure material handling
  • manual pry release gives full control over load detachment
  • ceramic magnet core maintains grip from -302 °F to 300 °F
  • carbon steel housing resists impact and daily workshop wear
  • compact 5 1/4 in loop handle fits tight workspaces

Specifications

BrandMAG-MATE

Questions about this item

How hot can the AC2201WLH get before the ceramic magnet loses strength?

The magnet is rated for continuous operation up to 300 degrees Fahrenheit; above that temperature the ceramic material may begin to demagnetise.

What surface condition does the carbon-steel housing need to grip a 93 lb load?

A clean, flat, ferrous surface at least as large as the 5-1/4 by 1-7/8 inch magnet face; paint, rust or curvature will reduce the rated capacity.

Will the manual pry release still free the magnet after it has been stuck to a hot plate at 300 °F?

Yes, the pry mechanism is purely mechanical and functions across the full -302 °F to 300 °F operating range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.