We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red rectangular ceramic magnet in carbon steel housing with loop handle

Mag-Mate

Mag-Mate AC2100WLH Manual Lifting Magnet 25 lb

SKU CH-ZSFT-JFESJ

Manual lifting magnet handles 25 lb loads with a ceramic magnet and manual pry release, operating from -302 to 300 °F

  • 25 lb lifting capacity for secure handling of ferrous parts
  • Manual pry release gives direct control when detaching the load
  • Ceramic magnet core maintains pull force from -302 °F to 300 °F
  • Carbon-steel housing protects the magnet in rough workshop conditions
  • Loop handle allows one-handed carry and quick attachment

25 lb Manual Lifting Magnet

The Mag-Mate AC2100WLH is a compact ceramic magnet rated for a maximum load capacity of 25 lb. It suits technicians and hobbyists who need a portable tool for retrieving or positioning small ferrous parts in workshops or on job sites. The loop handle allows one-handed carry and quick attachment to a lanyard or belt clip. It is not for buyers who need to move heavier plate steel or structural components.

Installation and Common Issues

No mounting hardware or power source is required; the magnet engages simply by placing it against a clean, flat ferrous surface. The manual pry release lever breaks the magnetic hold so the part can be removed without tools. Dirt, paint, rust or an uneven surface will reduce the effective holding force well below the rated figure. The unit must not be used as a permanent clamp or subjected to side loading that could shear the bond.

Operating Temperature Range

The magnet is rated for continuous operation from -302 °F up to 300 °F. This wide ceramic temperature window makes it suitable for cold-storage environments and high-heat areas such as welding tables or heat-treating fixtures. Verify that the surrounding application stays within these limits before relying on the magnet for critical lifts.

Highlights

  • 25 lb lifting capacity for secure handling of ferrous parts
  • Manual pry release gives direct control when detaching the load
  • Ceramic magnet core maintains pull force from -302 °F to 300 °F
  • Carbon-steel housing protects the magnet in rough workshop conditions
  • Loop handle allows one-handed carry and quick attachment

Specifications

BrandMAG-MATE

Questions about this item

How do I confirm the Mag-Mate AC2100WLH is holding its full 25 lb capacity after I engage it?

Attach the magnet to a clean, flat ferrous surface, engage the handle fully, then apply a steady 25 lb pull; if the magnet does not release, it is operating at its rated capacity.

What comes in the box with the Mag-Mate AC2100WLH and what must I source separately?

The package contains the manual lifting magnet with its ceramic core, carbon-steel housing and loop handle; no mounting hardware, lifting chains or test weights are included.

Which version of the Mag-Mate AC2100WLH should I choose for a job that reaches 300 °F?

The AC2100WLH is rated for a maximum operating temperature of 300 °F, so this single model covers the requirement; no alternate capacity or temperature variant is offered.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.