We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver ceramic magnetic welding square with multiple angle positions

Mag-Mate

Mag-Mate 11094 Magnetic Welding Square 3 in 55 lb

SKU CH-C85S-NV47G

Magnetic welding square holds three pieces at five preset angles with 55 lb pull force

  • Holds three metal pieces simultaneously for efficient setup
  • Ceramic magnet delivers 55 lb maximum pull strength
  • Five preset angles from 30 to 90 degrees cover common joints
  • Compact 3 in height fits tight workspaces
  • Steel housing with 1.13 in plate thickness resists shop wear

Magnetic Welding Square 3 in 55 lb

The Mag-Mate 11094 is a ceramic magnet welding square designed to hold three pieces of metal simultaneously during fabrication. Its steel housing provides durability for workshop use while the fixed-angle design supports hands-free positioning at five preset angles. This tool suits welders and metalworkers who need repeatable joint alignment without adjustable mechanisms.

55 lb pull with five fixed angles

The magnet delivers a maximum pull of 55 lb across angles of 30, 45, 60, 75 and 90 degrees, giving firm hold for brackets and plate steel up to 1.13 in thick. A 5/16 in centre hole allows bolt-down mounting or use as a pivot point. The 4.4 in square footprint limits reach on larger assemblies, so the tool runs out of leverage on wide or heavy sections that exceed its magnetic grip.

Non-switchable ceramic magnet

The ceramic magnet is permanently active with no on/off switch, meaning the square attracts ferrous material the moment it is placed. Users who need to break the hold quickly or reposition without sliding the tool off the workpiece will find this a constraint. Buyers requiring a switchable magnet for rapid part changes should look elsewhere.

Highlights

  • Holds three metal pieces simultaneously for efficient setup
  • Ceramic magnet delivers 55 lb maximum pull strength
  • Five preset angles from 30 to 90 degrees cover common joints
  • Compact 3 in height fits tight workspaces
  • Steel housing with 1.13 in plate thickness resists shop wear

Specifications

BrandMag-mate

Questions about this item

Will the 55 lb magnetic pull hold my existing 1.13 in thick steel brackets without slipping?

The square delivers 55 lb of pull and is designed for 1.13 in plate thickness, so it will grip steel brackets of that thickness securely during welding.

How can I verify the square is holding at the correct 90 degree angle after positioning?

The square locks at five preset angles including 90 degrees; once the metal pieces seat against the faces at that detent, the joint is square.

Does the 11094 include any mounting hardware or do I need to buy bolts for the 5/16 in center hole separately?

The box contains only the magnetic welding square with its multi-language label; bolts for the 5/16 in center hole are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.