We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green liquid retaining compound in 50ml bottle

Loctite

Loctite 135516 Retaining Compound 635 Green 50ml Bottle

SKU CH-YY6M-0SJ17

High-strength green retaining compound for steel bonds, 50 ml bottle, fills gaps up to 0.015 in, cures in one day to 4,495 psi shear strength

  • High-strength bond for steel assemblies
  • Withstands temperatures from -65 °F to 400 °F
  • Fills gaps up to .015 in for tight fits
  • 6-minute working time allows precise positioning
  • 50 ml bottle supplies enough compound for multiple jobs

High-strength retaining compound for steel

Loctite 135516 is a green dimethacrylate liquid formulated to bond cylindrical steel parts with high shear strength. It fills gaps up to 0.015 inches and reaches full cure in one day, making it suitable for permanent assemblies that must resist vibration and shock.

Thermal stability and clean-up requirements

The compound operates continuously from minus 65 to 400 degrees Fahrenheit without degrading. A primer is required before application, and any excess or spillage must be removed using solvent and a wire brush before the adhesive sets.

Maximum gap fill of 0.015 inches decides fit

This single dimension determines whether the product will work for a given joint; gaps larger than 0.015 inches cannot be reliably filled. Buyers needing to bridge wider clearances should select a different grade.

Highlights

  • High-strength bond for steel assemblies
  • Withstands temperatures from -65 °F to 400 °F
  • Fills gaps up to .015 in for tight fits
  • 6-minute working time allows precise positioning
  • 50 ml bottle supplies enough compound for multiple jobs

Specifications

BrandLOCTITE

Questions about this item

How do I apply the retaining compound and what step is commonly missed?

Apply directly from the 50ml bottle to the steel surfaces, ensuring the gap does not exceed 0.015 in. The step often missed is using a primer, which is required for this compound to cure properly.

What maintenance or replacement will this bond need over time?

Once fully cured after 1 day, the bond achieves 4,495 psi shear strength and is designed to be permanent. No routine maintenance is required; replacement would only be necessary if the assembly is disassembled using heat and force.

What is the first limit reached under sustained high-temperature operation?

The maximum operating temperature is 400 Degrees F. Sustained exposure beyond this limit will degrade the dimethacrylate chemical base and cause the bond to fail before the minimum temperature of -65 Degrees F becomes a factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.