We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange HMPE soft shackle with anodised bar and nylon cover

Lockjaw

Lockjaw 15-037510 Soft Shackle 11200 lb WLL

SKU CH-SC0T-5VXBK

Soft shackle rated for 11200 lb working load with corrosion and UV resistant HMPE rope

  • 11,200 lb working load limit handles heavy pulls
  • 33,600 lbf breaking strength adds safety margin
  • HMPE rope resists corrosion and UV damage
  • Nylon cover protects rope from abrasion
  • 10 in maximum inside diameter fits large anchors

Lockjaw 15-037510 Soft Shackle Overview

The Lockjaw 15-037510 soft shackle provides a working load limit of 11,200 lb and a breaking strength of 33,600 lbf. It uses HMPE rope with a nylon cover and an anodized coating. The bar length is 2 5/8 in with a 1 1/8 in diameter. This shackle suits recovery and pulling tasks where metal hardware is undesirable.

Included Materials and Coating Benefits

The HMPE rope delivers corrosion-resistant and UV-resistant performance for outdoor exposure. A nylon cover adds abrasion protection around the rope body. The anodized coating on the bar resists surface degradation. These combined materials replace traditional steel shackles in environments where weight and rust are concerns.

Installation Notes and Usage Limits

The soft shackle installs by looping the rope through the bar and tightening the knot. No tools are required for basic attachment. The product carries a California Proposition 65 warning for chemicals linked to cancer and reproductive harm. It is specified as not for lifting applications. Users needing overhead lifting capacity should select rated lifting hardware instead.

Highlights

  • 11,200 lb working load limit handles heavy pulls
  • 33,600 lbf breaking strength adds safety margin
  • HMPE rope resists corrosion and UV damage
  • Nylon cover protects rope from abrasion
  • 10 in maximum inside diameter fits large anchors

Specifications

BrandLOCKJAW

Questions about this item

How often should the HMPE rope and nylon cover be inspected for wear or UV damage before replacement?

Inspect the HMPE rope and nylon cover before each use for cuts, abrasion, or UV degradation; replace the soft shackle immediately if any damage is found to maintain the 11200 lb working load limit.

What is the maximum sustained load the soft shackle can handle without exceeding its working load limit?

The working load limit is 11200 lb; do not exceed this value under sustained use, as the breaking strength of 33600 lbf provides a safety factor but is not a working limit.

Does the anodized bar or HMPE rope generate heat or require power during continuous all-day recovery operations?

No, the anodized bar and HMPE rope are passive components; they produce no heat and require no power during extended recovery or pulling tasks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.