We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow soft shackle with anodized bar and nylon cover

Lockjaw

Lockjaw 15-025008 Soft Shackle conveying

SKU CH-F6E2-DB5T6

A 5,500 lb working-load soft shackle with HMPE rope, nylon cover and anodized bar for corrosion- and UV-resistant pulling and conveying

  • 5,500 lb working load limit for heavy-duty pulling
  • 16,500 lbf breaking strength provides a strong safety margin
  • HMPE rope material resists corrosion and UV damage
  • Nylon cover protects the rope during use
  • Anodized coating adds extra corrosion resistance

Lockjaw 15-025008 Soft Shackle

This soft shackle from Lockjaw provides a 5,500 lb working load limit for pulling and conveying tasks. It uses HMPE rope with a nylon cover and an anodized finish for corrosion and UV resistance. The design suits recovery or rigging situations where metal shackles could damage surfaces. Buyers who need a higher working load limit or a larger maximum inside diameter than 8 in should look elsewhere.

Installation and common issues

The shackle loops around an anchor point and tightens under load without tools. Its 2 in bar length and 3/4 in diameter fit through standard recovery points. Dirt or grit trapped between the rope and cover can accelerate wear, so rinse after muddy use. Users must remember the product is marked not for lifting applications.

Pre-order checks

Confirm the 5,500 lb working load limit matches your intended pull rating. Verify the 8 in maximum inside diameter clears your attachment hardware. The Proposition 65 notice indicates chemicals linked to cancer and reproductive harm, which may affect regulatory compliance in some regions. Ensure HMPE rope and nylon cover materials are compatible with your operating environment.

Highlights

  • 5,500 lb working load limit for heavy-duty pulling
  • 16,500 lbf breaking strength provides a strong safety margin
  • HMPE rope material resists corrosion and UV damage
  • Nylon cover protects the rope during use
  • Anodized coating adds extra corrosion resistance

Specifications

BrandLOCKJAW

Questions about this item

How do I verify the soft shackle is working as intended after setup?

Confirm the rope sits evenly on the 2 in bar with the 3/4 in diameter, check the anodized coating for damage and ensure the nylon cover shows no cuts before applying load.

What comes in the box and what must I buy separately?

The package contains the Lockjaw 15-025008 soft shackle with HMPE rope and nylon cover; no additional hardware is included.

Which capacity should I choose for a 5,500 lb working load limit?

This model is rated at 5,500 lb WLL with a 16,500 lbf breaking strength; select it when your application requires that exact working load limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.