We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hi-vis yellow polyester ratchet strap 30 ft long 2 in wide with chain grab hooks

Lift-all

Lift-all Tie Down Strap 30 ft 2 in 3300 lb Ratchet

SKU CH-4TBS-DXFHG

A 30 ft yellow polyester tie-down strap with ratchet adjustment, chain-extension grab-hooks, 3,300 lb working load limit and 10,000 lb/in tensile strength

  • 3,300 lb working load limit secures heavy cargo
  • 10,000 lb/in tensile strength resists sudden shock loads
  • 30 ft length spans wide loads or long anchor points
  • 2 in polyester webbing resists abrasion and UV damage
  • Hi-visibility yellow meets CVSA, FMCSA and US DOT standards

30 ft 2 in Tie Down Strap

This Lift-all tie down strap measures 30 ft long and 2 in wide with a working load limit of 3300 lb. The polyester webbing delivers a tensile strength of 10000 lb/in. A ratchet mechanism provides secure tension adjustment for cargo control. Fixed end length is 16 in with a chain extension grab hook.

Flatbed and general cargo use

Suits drivers securing loads on flatbeds or in enclosed trailers where CVSA, FMCSA and US DOT compliance is required. The hi-visibility yellow webbing aids inspection visibility. Not suited for overhead lifting or applications needing a longer reach than 30 ft. Buyers needing a different end fitting or a higher load limit should look elsewhere.

Ratchet tensioning with chain hook

Thread the webbing through the ratchet mandrel, pull tight and crank the handle to tension. The chain extension grab hook connects to anchor points or chain. Common issues include webbing jamming in the ratchet if not fed flat and hook deformation if side loaded beyond the rated limit. Inspect stitching and hardware before each use.

Highlights

  • 3,300 lb working load limit secures heavy cargo
  • 10,000 lb/in tensile strength resists sudden shock loads
  • 30 ft length spans wide loads or long anchor points
  • 2 in polyester webbing resists abrasion and UV damage
  • Hi-visibility yellow meets CVSA, FMCSA and US DOT standards

Specifications

BrandLIFT-ALL

Questions about this item

What anchor point do I need on my trailer for the 16 in chain extension grab-hook to connect securely?

The fixed end includes a 16 in chain extension with a grab-hook that latches onto a standard D-ring, stake pocket or frame hole rated for at least the 3,300 lb working load limit.

Will the 2 in wide polyester webbing fit through the existing ratchet buckles on my older tie-down straps?

The ratchet mechanism is built into this strap and is sized for the 2 in webbing; it does not interchange with buckles from other brands or widths.

How can I confirm the 3,300 lb working load limit is still valid after I tension the ratchet?

Check that the yellow webbing shows no cuts or abrasion, the ratchet pawl clicks positively on each notch, and the grab-hook seats fully without deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.