We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow nylon web hose halter with choker ends, 64 in long

Lift-all

Lift-all HH264 Hose Halter 2-6 in 64 in

SKU CH-3WRY-7MR4N

Secures hydraulic, pneumatic or water hoses from 2 in to 6 in ID with a 64 in nylon web halter rated to 52,000 psi at 1/4 in ID

  • Secures hoses up to 6 in ID with choker end
  • 64 in length covers extended hose runs
  • Nylon two-ply web halter resists abrasion
  • Rated for 52 000 psi at 1/4 in ID
  • Meets Canada OHS and OSHA standards

Hose Halter for 2 to 6 in ID

The Lift-all HH264 is a web safety halter designed to restrain hydraulic, pneumatic or water hoses with inside diameters between 2 in and 6 in. It provides a whip-check connection between two hose ends to limit movement if a coupling fails or a line bursts. The 64 in overall length suits a range of industrial and mobile equipment installations.

Sustained pressure restraint

The halter is rated for a maximum hose pressure of 52,000 psi at 1/4 in ID, with the allowable pressure varying according to the actual hose inside diameter. Its two-ply nylon construction maintains holding force during continuous high-pressure service rather than only during a brief pressure spike. The choker end type tightens securely around each hose when tension increases.

Thermal, noise and power profile

As a passive nylon restraint the device generates no heat, produces no noise and draws no electrical power during normal use. It complies with Canada OHS and OSHA standards for hose-to-hose safety cables. The material resists abrasion and environmental exposure without active cooling or maintenance.

Highlights

  • Secures hoses up to 6 in ID with choker end
  • 64 in length covers extended hose runs
  • Nylon two-ply web halter resists abrasion
  • Rated for 52 000 psi at 1/4 in ID
  • Meets Canada OHS and OSHA standards

Specifications

BrandLIFT-ALL

Questions about this item

Will the nylon webbing and choker end get hot or noisy when the 52,000 psi hydraulic line runs all day?

The HH264 is a passive nylon web halter with no moving parts, so it generates no heat or noise during continuous high-pressure service.

What must already be on the hose for the 64 in choker halter to attach securely?

The halter wraps around the hose itself and cinches with its choker end, so no extra fittings, clamps or ferrules are required.

Can this 2-6 in halter be used on the older 1/4 in ID hose still on my reel?

No, the minimum inside diameter is 2 in, so a 1/4 in hose is far too small for the HH264 to grip safely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.