Lift-all
Lift-all 61002 Ratchet Strap Assembly 3300 lb Flat Hook Yellow
Polyester tie-down strap with ratchet adjustment and flat-hook ends, 30 ft long and rated for a 3,300 lb working load limit
- MaterialHAWA
- 3300 lb working load secures heavy cargo
- 10,000 lb/in tensile strength resists sudden shock
- 30 ft overall length spans long loads
- 2 in polyester webbing handles outdoor exposure
- Flat-hook steel ends anchor to stake pockets
3300 lb Ratchet Tie-Down
The Lift-all 61002 is a polyester ratchet strap assembly rated for a 3300 lb working load limit and a 10,000 lb tensile strength. It meets CVSA, FMCSA and US DOT standards for cargo securement. Professional drivers and fleet operators use it to lock down heavy equipment, machinery or palletised loads on flatbed trailers.
30 ft Length with 16 in Fixed End
At 30 ft overall the strap reaches across wide decks and tall stacks, while the 16 in fixed end anchors quickly to stake pockets or rub rails. The 2 in wide webbing distributes force evenly, yet the single-piece design cannot span two separate anchor points without an additional strap. Buyers needing longer continuous runs or dual attachment points must add another assembly.
Flat Steel Hook and Ratchet Tensioner
The flat steel hook slips over thin flat surfaces such as trailer rub rails or angle iron where a standard J-hook will not seat. The ratchet mechanism lets one operator tension the load to the full 3300 lb limit without auxiliary tools. No soft-loop protectors, corner guards or storage bag are included, so sharp edges can cut the webbing unless the user supplies their own protection.
Highlights
- 3300 lb working load secures heavy cargo
- 10,000 lb/in tensile strength resists sudden shock
- 30 ft overall length spans long loads
- 2 in polyester webbing handles outdoor exposure
- Flat-hook steel ends anchor to stake pockets
Specifications
| Brand | LIFT-ALL |
|---|---|
| Material | HAWA |
Questions about this item
Will the 2 in wide webbing and 3,300 lb working load limit work with the existing anchor points on my older trailer?
The strap is 2 in wide with a 3,300 lb working load limit and 10,000 lb/in tensile strength, so it will fit standard 2 in anchor points and meet CVSA, FMCSA and US DOT requirements for securement.
How can I confirm the ratchet mechanism is tensioning correctly after I install the strap?
Operate the ratchet handle through several clicks until the webbing is drum-tight with no visible slack; the fixed 16 in end should stay flat against the anchor and the yellow polyester webbing should show no twists or fraying under load.
Does the package include both flat hooks and the ratchet, or do I need to buy extra hardware?
The assembly arrives complete with a steel flat hook on the fixed 16 in end, a steel flat hook on the adjustable end and the integrated ratchet buckle; no additional hooks, chains or tensioners are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



