Lift-all
Lift-all 60502 Ratchet Strap Assembly 1600 lb Flat Hook conveying
A 30 ft yellow polyester tie-down strap with a 1,600 lb working load limit, flat-hook steel ends and a ratchet tensioner meeting CVSA, FMCSA and US DOT standards
- MaterialHAWA
- 1,600 lb working load limit for heavy cargo
- 5,000 lb tensile strength withstands extreme tension
- Ratchet adjustment tightens loads quickly and securely
- 30 ft overall length spans large trailers easily
- CVSA, FMCSA and US DOT compliant for transport
Lift-All 60502 Ratchet Strap Assembly
The Lift-All 60502 is a yellow polyester tie-down strap built for cargo securement. It uses a ratchet mechanism with a flat-hook end fitting for reliable attachment. The assembly carries a 1,600 lb working load limit and meets CVSA, FMCSA and US DOT standards. It suits drivers and operators needing a compliant general-purpose restraint.
Behaviour under sustained load
The polyester webbing provides a tensile strength of 5,000 lb per inch to resist elongation during transit. A 16-inch fixed end anchors the assembly while the 30-foot overall length accommodates various load sizes. The ratchet adjustment maintains tension over long distances without slip. The 2-inch width distributes force evenly across the strap surface.
Build quality and daily use
Flat steel hooks engage anchor points quickly on flatbed trailers or truck beds. The yellow colour improves visibility during pre-trip inspections and low-light conditions. Reinforcement is rated for general-purpose applications across mixed freight types. This strap is not suited for overhead lifting or loads exceeding the 1,600 lb working load limit.
Highlights
- 1,600 lb working load limit for heavy cargo
- 5,000 lb tensile strength withstands extreme tension
- Ratchet adjustment tightens loads quickly and securely
- 30 ft overall length spans large trailers easily
- CVSA, FMCSA and US DOT compliant for transport
Specifications
| Brand | LIFT-ALL |
|---|---|
| Material | HAWA |
Questions about this item
How much tension can the ratchet mechanism hold during a full day of highway vibration?
The strap has a working load limit of 1,600 lb and a tensile strength of 5,000 lb/in, so the ratchet assembly maintains that tension continuously.
Does the flat-hook end fit directly onto my trailer’s rub rail, or do I need extra fittings?
The 2-inch-wide flat hooks are designed to engage standard rub-rail slots or stake pockets without additional hardware.
Will the 30-foot polyester webbing stretch or degrade when paired with older chain binders on the same load?
Polyester webbing stretches very little under its 1,600 lb working load, and the CVSA, FMCSA and US DOT compliance means it is approved for mixed securement systems.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



