LIDER 15A GFCI USB Outlet 4.2A Type-A & Type-C Space Gray 2-Pack
A tamper-resistant 15A GFCI outlet with integrated USB-A and USB-C ports delivering 4.2A total charging output and self-testing ground-fault protection
- Type39121400
- Item Count12 pack
- Amps15
- Number of Poles/Wires2
- Horsepower15
- MaterialPlastic
- All-in-one 15A GFCI outlet with 4.2A USB Type-A & Type-C charging
- Self-testing ground-fault protection with LED status indicators in 1/40th second
- Anti-interference design reduces false tripping from electrical noise
- Space gray screwless wall plate with clamp terminals for flush installation
- ETL listed 15A 125V with 20A feed-through rating and 3-year warranty
All-in-One GFCI USB Outlet
The LIDER 15A GFCI outlet combines tamper-resistant AC receptacles with integrated USB Type-A and Type-C ports for kitchens, bathrooms and workspaces. It delivers a total USB output of 4.2A, split as 2.4A on Type-A and 3A on Type-C, removing the need for separate adapters. ETL listed at 15A, 125V AC, 60Hz with a 20A feed-through rating.
Upgrade from Standard Receptacles
This unit replaces a basic duplex outlet where ground-fault protection and USB charging are both required. The jump is worth it in high-use areas because the built-in self-test runs every 12 minutes and cuts power in 0.025 seconds when a fault is detected. Anti-interference technology reduces false trips caused by electrical noise from other equipment.
Capacity and Headroom
The outlet comfortably handles four simultaneous device charges within the 4.2A shared USB budget and supports 20A feed-through for downstream loads. It runs out when the combined USB draw exceeds 4.2A or when the 15A GFCI circuit breaker trips on a ground fault. A 3½-inch deep electrical box is recommended for the side-wiring design.
Highlights
- All-in-one 15A GFCI outlet with 4.2A USB Type-A & Type-C charging
- Self-testing ground-fault protection with LED status indicators in 1/40th second
- Anti-interference design reduces false tripping from electrical noise
- Space gray screwless wall plate with clamp terminals for flush installation
- ETL listed 15A 125V with 20A feed-through rating and 3-year warranty
Specifications
| Brand | LIDER |
|---|---|
| Series | C |
| Part Number | LU-GF42AC-SGSWP2P |
| Type | 39121400 |
| Item Count | 12 pack |
| Amps | 15 |
| Number of Poles/Wires | 2 |
| Horsepower | 15 |
| Material | Plastic |
| Features | Television |
Questions about this item
What size electrical box is recommended for the side-wiring design of this 15A GFCI USB outlet?
A 3½-inch deep electrical box is recommended to accommodate the side-wiring design and ensure proper flush placement.
How do the clamp-type terminals work during installation, and what is a common mistake?
Loosen the terminal screws, insert stripped wires into the clamp openings, then tighten securely; a common mistake is not tightening the screws enough, which can cause loose connections.
What do the LED indicator colours mean, and when should the outlet be replaced?
Solid green means normal operation, blinking red signals an open neutral, and solid red indicates a trip; replace the unit if the self-test fails or the red LED stays on after reset.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



