We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Leeson 108022.00 DC permanent magnet motor 56C frame transparent finish

Leeson

Leeson 108022.00 DC Permanent Magnet Motor 56C HVAC Control

SKU CH-ZG7N-5SQHK

A 1 HP, 90 V DC permanent-magnet motor in a 56C frame delivering 750 RPM and 36 in-lb torque with a totally enclosed fan-cooled design for continuous HVAC duty

  • ColorTransparent
  • 1 HP permanent-magnet torque for reliable HVAC duty
  • 90 V DC input matches common control voltages
  • 750 RPM nameplate speed suits fan and pump loads
  • 56C face/base mount with removable base eases installation
  • Totally enclosed fan-cooled design runs continuously at 40 °C ambient

Leeson 108022.00 DC Permanent Magnet Motor

This Leeson 108022.00 is a DC permanent magnet motor rated at 1 HP and 90 V DC. It uses a 56C frame with a face and base mounting arrangement and a removable base. The motor is built for continuous duty in HVAC control applications.

Capacity and headroom

The motor delivers 36 in-lb of full-load torque at 750 RPM while drawing 10.0 A. Its service factor is 1, so it has no overload margin beyond the nameplate rating. Operation is limited to a maximum ambient temperature of 40 degrees C.

Thermals, noise and power draw

The totally enclosed fan-cooled enclosure manages heat during continuous operation without external ventilation. Insulation class F supports the rated temperature rise. No thermal protection is fitted, so the installer must provide external safeguards. The unit runs on 90 V DC supply.

Highlights

  • 1 HP permanent-magnet torque for reliable HVAC duty
  • 90 V DC input matches common control voltages
  • 750 RPM nameplate speed suits fan and pump loads
  • 56C face/base mount with removable base eases installation
  • Totally enclosed fan-cooled design runs continuously at 40 °C ambient

Specifications

BrandLEESON
ColorTransparent

Questions about this item

Will the 56C face mount and 5/8 in shaft match the pump coupling I already use?

The motor uses a 56C frame with a removable base and a 5/8 in diameter shaft that is 1 7/8 in long, so it fits standard 56C couplings and mounting patterns.

How can I confirm the 90 V DC supply is delivering the rated 10.0 A at 1750 RPM?

Measure the DC voltage at the terminals under load and the current draw with a clamp meter; the nameplate shows 1 HP at 1750 RPM with 10.0 A full-load amps.

Does the box include a mounting base or do I need to order one separately?

A removable base is built onto the motor, so no separate base is required for face or foot mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.