LDK 60W Soldering Iron Kit 200-450°C 900M Tips
A 60 W adjustable-temperature soldering iron with 200–450 °C range, five 900M tips, 0.8 mm rosin-core wire, desoldering pump, ESD-15 tweezers, 8-in-1 screwdriver, wire cutter and carry bag
- Watts60 watts
- Compatibility/FitmentSI-002CB, LDK, SI1002CB
- Standards/Certificationschemical: lead
- Commercial/Residentialsoldering iron
- Adjustable 200–450 °C range suits diverse soldering tasks
- 60 W ceramic heater reaches working temperature quickly
- 8-in-1 magnetic screwdriver handles multiple fastener types
- Wire cutter with anti-slip grip cuts and strips cables
- Portable carry bag keeps all accessories organised
Soldering Kit for Electronics and DIY
This 60-watt adjustable soldering iron kit targets hobbyists, technicians and engineers who need a portable station for circuit repair, wire work and light brazing. It includes a temperature-controlled iron, five 900M-series tips, rosin-core solder wire, anti-static tweezers, a desoldering pump, a stainless-steel stand and a multifunction screwdriver with eight magnetic bits, all stored in a carry bag. The kit suits bench use and field service where a compact, all-in-one solution is preferred.
110 V Operation with Ceramic Heating
The iron runs on 110 V mains power and draws between 20 W and 60 W depending on the set temperature, which is adjustable from 200 °C to 450 °C (392 °F to 842 °F). A ceramic heating tube brings the tip to working temperature quickly, while the stainless-steel stand and included cleaning sponge help maintain tip condition during extended sessions. No fan or active cooling is fitted, so the unit operates silently.
Accessories Extend Immediate Capability
The bundled wire cutter and stripper simplify cable preparation without a separate tool, and the magnetic-bit screwdriver handles common fastener types found in electronic enclosures. Anti-static tweezers protect sensitive components during placement, and the desoldering pump allows quick solder removal for rework. The carry bag keeps every piece organised and reduces the risk of lost tips or hardware between jobs.
Highlights
- Adjustable 200–450 °C range suits diverse soldering tasks
- 60 W ceramic heater reaches working temperature quickly
- 8-in-1 magnetic screwdriver handles multiple fastener types
- Wire cutter with anti-slip grip cuts and strips cables
- Portable carry bag keeps all accessories organised
Specifications
| Watts | 60 watts |
|---|---|
| Compatibility/Fitment | SI-002CB, LDK, SI1002CB |
| Standards/Certifications | chemical: lead |
| Commercial/Residential | soldering iron |
Questions about this item
How do I set the correct voltage for the 110V soldering iron before first use?
The iron operates on 110V mains power; plug it directly into a compatible outlet, turn the temperature dial to the desired setting between 200°C and 450°C, and allow the ceramic heater to reach temperature — skipping the warm-up period is the common mistake that leads to cold joints.
Which consumables in the kit will need replacement after extended use?
The 900M-series tips, the cleaning sponge, the 0.8mm 12g rosin-core solder wire (2.0% flux), and the desoldering pump seals are consumables; tips oxidise over time, the sponge wears thin, solder wire is consumed, and pump suction drops when seals degrade.
What is the first limitation I will hit when running the iron continuously at high temperature?
The supplier notes that working for long hours at high temperature may shorten the iron's life; sustained operation near the 450°C (842°F) upper limit accelerates tip oxidation and ceramic-heater wear before any other component fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00214162BTC
In stock