Lab Safety Supply Inc
Lab Safety Supply Inc Syringe Filter PTFE 0.45um 30mm PK30
PTFE syringe filter with 0.45 µm pore size, sterile housing, 100 mL capacity and female luer lock to male luer slip connections
- PTFE membrane resists aggressive solvents
- 45 µm pore size captures fine particulates
- 30 mm diameter handles up to 100 mL samples
- Sterile filters eliminate pre-use preparation
- Female Luer Lock inlet and Male Luer Slip outlet fit standard syringes
ZORO SELECT 0.45 µm PTFE Syringe Filter Pack
This pack contains thirty sterile syringe filters with a PTFE membrane and 0.45 µm pore size. Each filter has a 30 mm housing diameter and handles up to 100 mL of sample. Connections are female Luer lock inlet and male Luer slip outlet.
Suits labs needing sterile PTFE filtration.
These filters suit routine sterile filtration of solvents and aqueous solutions where PTFE chemical resistance is required. The 100 mL maximum capacity per filter limits use for larger batch processing. Buyers needing higher throughput or non-sterile bulk options should look elsewhere.
0.45 µm pore size and 65 psi pressure rating
The membrane pore size of 0.45 µm determines particle retention for clarification and sterilisation tasks. Maximum operating pressure is 65 psi (4.5 bar), setting the upper limit for syringe-driven or pressure-assisted workflows.
Highlights
- PTFE membrane resists aggressive solvents
- 45 µm pore size captures fine particulates
- 30 mm diameter handles up to 100 mL samples
- Sterile filters eliminate pre-use preparation
- Female Luer Lock inlet and Male Luer Slip outlet fit standard syringes
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What inlet and outlet connections does the 30 mm PTFE syringe filter use?
The filter has a female Luer Lock inlet and a male Luer Slip outlet, both sized for the 30 mm housing.
What is the correct way to attach the filter to a syringe to avoid leaks?
Screw the female Luer Lock inlet onto the syringe tip until it locks; do not overtighten the male Luer Slip outlet, which is a friction fit.
When should the sterile 0.45 µm PTFE filter be replaced during use?
Replace the filter if flow slows noticeably, pressure approaches the 65 psi limit, or after processing the rated 100 mL capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00212709BTC
In stock