KEHIPI
KEHIPI PDC004 15V PD Decoy Module 10 Pack
A pack of ten fixed 15 V USB-C PD decoy modules that negotiate up to 5 A from a compatible charger using a 2721 hardware chip, measuring 17.6 × 10.2 × 4.2 mm and rated for −25 to 85 °C at 5–95 % RH
- Color10PCS 15V
- Powers projects with fixed 15V USB-C input
- 10 modules per pack for multiple builds
- PD 3.0 chip negotiates up to 5A current
- Operates from -25°C to 85°C ambient
- Compact 17.6×10.2×4.2mm fits tight spaces
Project Power Module
The KEHIPI PDC004 pack contains ten USB-C PD decoy modules fixed at 15 volts. Each unit uses a 2721 hardware PD chip to negotiate power from a compatible source and passes the output directly to your project. Makers converting legacy hardware or building custom electronics gain a compact 17.6 by 10.2 by 4.2 millimetre trigger that supports up to five amps when paired with an electronically marked cable.
Source Compatibility Check
Verify that your USB-C power supply or charger explicitly lists 15 volts in its Power Delivery profile before ordering. The module only performs negotiation and cannot upgrade or change voltage; if the source lacks the requested level it will fall back to the next available one. Quick Charge only adapters will not work, and currents above three amps require an electronically marked Type-C cable.
Build and Daily Use
Operating range spans minus 25 to 85 degrees Celsius at five to 95 percent relative humidity for bench or enclosed installations. The fixed 15 volt output means the board cannot be reconfigured for other voltages, so each module is dedicated to a single rail. Female Type-C input keeps cabling simple while the tiny footprint fits tight enclosures without adding bulk.
Highlights
- Powers projects with fixed 15V USB-C input
- 10 modules per pack for multiple builds
- PD 3.0 chip negotiates up to 5A current
- Operates from -25°C to 85°C ambient
- Compact 17.6×10.2×4.2mm fits tight spaces
Specifications
| Brand | AITRIP |
|---|---|
| Model | PDC004 |
| Color | 10PCS 15V |
Questions about this item
What comes in the pack and do I need any extra cables or chargers?
The pack contains ten 15 V PD decoy modules. You must supply a genuine USB-PD power source and, for currents above 3 A, an electronically marked USB-C cable.
The listing mentions 15 V in the title but 9 V in the parameters — which voltage does this version actually request?
This version requests a fixed 15 V from the PD charger. The 9 V figure in the parameters belongs to a different variant and does not apply to these modules.
If my PD charger can deliver 15 V at 5 A, will the module pass the full 5 A to my project?
Yes, the module negotiates up to 5 A and passes whatever the charger supplies at 15 V, provided you use an e-marked cable for currents above 3 A.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SATACables MSD-887 micro SATA extension cable 20 inch 46mm SATA 2.6
- 1.66 ft.
eForChina 19V 4.74A 90W UK Plug AC Adapter 5.5x2.5mm Black
- Black
- Power Adapter



