We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of red and black test leads with fully insulated alligator clips, 6.56ft flexible copper cable

KEHIPI

KEHIPI Alligator Clip Test Leads 2PCS 6.56ft 1000V 15A

SKU CH-ECRW-MRRWG

Two 6.56 ft copper test leads with fully insulated 10 mm alligator clips rated for 1000 V and 15 A

  • Safe 1000 V testing with fully insulated clips
  • 15 A capacity handles automotive and general circuits
  • 56 ft flexible copper leads reach distant test points
  • 10 mm jaw opening grips a wide range of terminals
  • Red and black pair simplifies polarity identification

Dual-ended alligator test leads for 15 A circuits

These 6.56 ft test leads terminate in fully insulated copper alligator clips at both ends. They are built for electrical testing on automotive circuits, vintage vehicles and general low-voltage work where the fuse rating is 15 A or less. The red and black pair simplifies polarity identification during diagnosis.

Push-on clips with 10 mm jaw opening

Each clip opens to a maximum of 10 mm and is firmly welded to the flexible copper cable. The full-wrap PVC sheath prevents the clip from slipping during use and the spring retains its shape over repeated connections. No tools are required — simply squeeze the clip onto the test point.

Rated 1000 V and 15 A continuous

The single specification that decides fit is the 15 A current rating combined with 1000 V insulation. Circuits protected by a larger fuse or operating above this voltage need a different lead set.

Highlights

  • Safe 1000 V testing with fully insulated clips
  • 15 A capacity handles automotive and general circuits
  • 56 ft flexible copper leads reach distant test points
  • 10 mm jaw opening grips a wide range of terminals
  • Red and black pair simplifies polarity identification

Specifications

BrandGoupchn

Questions about this item

How can I confirm the leads are conducting properly after connecting the 10 mm alligator clips?

Check that the spring-loaded jaws grip the test points firmly and that a multimeter shows continuity with near-zero resistance across the 6.56 ft copper conductors.

What comes in the package and is anything else required for basic electrical testing?

The box contains two dual-ended test leads — one red, one black — each with fully insulated 10 mm alligator clips on both ends; no extra items are needed for standard 1000 V, 15 A circuit checks.

Which version should I choose if my circuits are fused at 15 A or less?

The single listed version rated at 1000 V and 15 A with 6.56 ft pure-copper leads and 10 mm clip opening covers all applications using fuses of 15 A or smaller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.