We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jonard long nose pliers 6-3/4 inch serrated steel finish

Jonard

Jonard Long Nose Plier 6-3/4" Serrated JIC-203

SKU CH-J4VK-F0YH6

Needle-nose pliers grip small wires in tight spaces and cut 18 AWG copper wire

  • TypePliers
  • Reaches tight spaces with 6-3/4" needle-nose design
  • Grips small wires securely via serrated jaws
  • Cuts 18 AWG copper wire using integrated stripper
  • Non-insulated build suited for de-energised switchboard work
  • Prop 65 warning applies — see www.P65Warnings.ca.gov

Jonard 6-3/4" Long Nose Plier

The Jonard JIC-203 is a new hand tool built for switchboard work and other tasks that demand reach into tight spaces. Its needle-nose profile and serrated jaws grip small wires or parts securely. A built-in stripping function handles 18 AWG copper wire, adding a second job to one tool. The plier measures 6 7/8 inches overall.

Upgrade from basic combination pliers

Standard combination pliers lack the narrow nose needed for dense terminal blocks or cramped panels. The JIC-203 adds a dedicated 1/2-inch cutter and a 1/8-inch tip width that slips between tight conductors. The jump is worth it when you regularly strip 18 AWG copper and need a straight, non-insulated jaw that reaches past obstacles.

Capacity for fine gauge copper work

The tool comfortably handles 18 AWG copper wire with its cutter and stripper, while the 1 1/4-inch maximum jaw opening accepts small fittings. It runs out on larger gauges, insulated cable, or any job requiring voltage-rated insulation or non-sparking materials. Buyers who need more cutting capacity or certified safety ratings should look elsewhere.

Highlights

  • Reaches tight spaces with 6-3/4" needle-nose design
  • Grips small wires securely via serrated jaws
  • Cuts 18 AWG copper wire using integrated stripper
  • Non-insulated build suited for de-energised switchboard work
  • Prop 65 warning applies — see www.P65Warnings.ca.gov

Specifications

BrandJonard Tools
TypePliers

Questions about this item

What overall length must the workbench clearance accommodate for the Jonard JIC-203?

The pliers measure 6 7/8 inches overall, so allow at least that much clear space in the tool drawer or pouch.

Which step is often missed when using the built-in stripper on 18 AWG copper wire?

Match the wire to the 18 AWG stripping notch before squeezing; using the cutter section instead nicks the conductor.

When should the cutting edges be dressed or the pliers replaced?

Replace them once the 1/2-inch cutter no longer cleanly severs 18 AWG copper or the 1/8-inch tip width shows visible wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.