We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue-handled long-nose pliers with tapered jaws and side cutter

Jonard

Jonard JIC-21257 Long Nose Plier 6 7/8 in

SKU CH-MH72-0QEJ1 MPN JIC-21257

Needle-nose pliers with built-in wire stripper, crusher and cutter for 24-22 AWG copper wire

  • TypePliers
  • Needle-nose jaws reach tight spaces with 1 7/8 in jaw length
  • Cuts 24-22 AWG copper wire using 1/2 in cutter length
  • Strips insulation via 0.030 in stripping hole function
  • Blue plastic grips provide comfortable non-slip hold
  • 6 7/8 in overall length gives extended leverage

Long-nose pliers for precision wiring

The Jonard JIC-21257 is a 6 7/8 in needle-nose plier built for gripping, bending and cutting copper wire. Its 1 7/8 in jaw length and 1/16 in tip width reach into tight junctions, while the 1/2 in cutter handles 24 to 22 AWG conductors. A 0.030 in stripping hole and integrated crusher add wire-prep functions in one tool.

Technicians doing fine electrical work

The slim profile and plastic grip suit panel wiring, terminal blocks and small-conductor repair where knuckle clearance is limited. The tool is not insulated and carries no voltage rating, so it must not be used on live circuits. Buyers who need ESD-safe handles or certified non-sparking jaws for hazardous atmospheres should look elsewhere.

1/16 in tip width for tight access

This dimension decides whether the plier fits the connectors and wire bundles you encounter daily. If the work calls for a broader tip or a larger jaw opening than 1 1/8 in, a different nose geometry will be required.

Highlights

  • Needle-nose jaws reach tight spaces with 1 7/8 in jaw length
  • Cuts 24-22 AWG copper wire using 1/2 in cutter length
  • Strips insulation via 0.030 in stripping hole function
  • Blue plastic grips provide comfortable non-slip hold
  • 6 7/8 in overall length gives extended leverage

Specifications

BrandJonard
ModelJIC-21257
TypePliers

Questions about this item

Will the 6 7/8 in overall length fit in the same tool pouch as my current 6 in pliers?

At 6 7/8 in long, these Jonard JIC-21257 pliers are slightly longer than a standard 6 in model, so check your pouch depth before relying on the same slot.

How can I verify the 1/2 in cutter is aligned correctly after first use?

Close the jaws fully; the cutting edges should meet evenly along the entire 1/2 in length with no visible gap or overlap at the tip.

Does the box include the 0.030 in stripping hole gauge or must I buy a separate stripper?

The stripping hole is machined into the jaws of the JIC-21257 itself, so no separate gauge or stripper is required for 24 to 22 AWG copper wire.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.