We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 1.75 mm PLA+ filament on a 1 kg spool

JG MAKER

JG MAKER PLA Pro (PLA+) 1.75mm Blue 1kg filament

SKU CH-788Q-ZCV8H

PLA+ filament on a 1 kg spool with ±0.02 mm accuracy for FDM printers and 3D pens

  • ColorBlue

Color Blue

  • Reliable prints with ±0.02 mm dimensional accuracy
  • Stronger, tougher parts from PLA+ material
  • Clog-free, bubble-free, tangle-free spool winding
  • Moisture-protected filament in vacuum pack with desiccant
  • Ready for all FDM printers at 200–210 °C nozzle, 50–60 °C bed

Filament for FDM printers and pens

This JG MAKER PLA Pro (PLA+) spool is a 1.75 mm material supplied in a 1 kg vacuum-sealed pack with desiccant. It is manufactured with full mechanical winding and manual inspection to be clog-free, bubble-free and tangle-free. The formulation is harder and tougher than standard PLA for improved layer adhesion and a higher print success rate.

Upgrade from standard PLA

The tighter ±0.02 mm dimensional accuracy reduces extruder skipping and surface artefacts compared with looser-tolerance PLA. Switching is worthwhile when you need stronger functional parts or consistent results on long, unattended prints. It is not suited for applications that demand high-temperature resistance or specialised engineering-grade polymers.

Behaviour on long prints

Recommended nozzle temperatures of 200 to 210 °C and bed temperatures of 50 to 60 °C keep flow stable over extended runs. The moisture-resistant packaging helps maintain diameter consistency so the filament feeds evenly from start to finish. Store the spool sealed when not in use to preserve this reliability.

Highlights

  • Reliable prints with ±0.02 mm dimensional accuracy
  • Stronger, tougher parts from PLA+ material
  • Clog-free, bubble-free, tangle-free spool winding
  • Moisture-protected filament in vacuum pack with desiccant
  • Ready for all FDM printers at 200–210 °C nozzle, 50–60 °C bed

Specifications

ColorBlue

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What spool diameter and filament width must my printer accept for this 1 kg PLA+?

The spool holds 1 kg of 1.75 mm filament wound to a dimensional accuracy of ±0.02 mm, so any FDM printer or 3D pen that takes 1.75 mm material will accept it.

Which nozzle and bed temperatures should I set for the first layer, and what common step causes adhesion failure?

Set the nozzle to 200–210 °C and the bed to 50–60 °C; skipping the bed-level check before the first layer is the step most often missed and leads to poor adhesion.

How should I store the filament between prints to avoid moisture-related printing defects?

Keep the spool in its vacuum-sealed bag with the included desiccant, and reseal it in a plastic bag whenever you pause printing for more than a short time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.