We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PLA+ filament on a 1 kg spool, 1.75 mm diameter

JG MAKER

JG MAKER PLA+ 1.75mm Red 1kg filament

SKU CH-QX8Z-E77Y7

1.75 mm PLA+ filament on a 1 kg spool with ±0.02 mm accuracy for clog-free FDM printing

  • ColorRed

Color Red

  • Precise prints with ±0.02 mm dimensional accuracy
  • Stronger, tougher models thanks to PLA+ formulation
  • Clog-free, bubble-free, tangle-free spool from mechanical winding
  • Vacuum-sealed with desiccant to keep filament dry
  • Works with all FDM printers and 3D pens

PLA+ filament for FDM printers and pens

JG MAKER PLA+ is a 1.75 mm polylactic-acid blend supplied on a 1 kg spool. It targets hobbyists and professionals who need consistent extrusion on most FDM 3D printers and 3D pens.

Vacuum-sealed spool with desiccant

The filament ships vacuum-packed with a desiccant sachet to limit moisture uptake. Mechanical winding and manual inspection aim to deliver a clog-free, bubble-free, tangle-free experience from first layer to last.

Dimensional tolerance and temperature window

Diameter accuracy is held to ±0.02 mm, supporting reliable flow through standard nozzles. Recommended settings are 200–210 °C nozzle and 50–60 °C bed, so the material works with common printer hardware without enclosure or specialised hot-ends.

Highlights

  • Precise prints with ±0.02 mm dimensional accuracy
  • Stronger, tougher models thanks to PLA+ formulation
  • Clog-free, bubble-free, tangle-free spool from mechanical winding
  • Vacuum-sealed with desiccant to keep filament dry
  • Works with all FDM printers and 3D pens

Specifications

ColorRed

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How should I store the Red 1.75 mm spool so it stays dry and tangle-free?

Keep the vacuum-sealed bag closed until printing starts. After each session, reseal the spool with the supplied desiccant in an airtight bag to prevent moisture uptake and tangles.

What dimensional tolerance should I expect on long prints with this PLA+?

The filament is wound to a +/- 0.02 mm diameter tolerance, so extrusion remains consistent even on extended builds.

Will the nozzle or bed run hotter than 210 °C during all-day printing?

Recommended nozzle range is 200-210 °C and bed 50-60 °C; staying within these limits avoids excess heat buildup during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.