We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PLA+ filament on a 1 kg spool, 1.75 mm diameter

JG MAKER

JG MAKER PLA+ 1.75 mm Green 1 kg filament

SKU CH-XKNJ-CZVYZ

Green PLA+ filament on a 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • ColorGreen

Color Green

  • Precise prints with ±0.02 mm dimensional accuracy
  • Stronger, tougher parts using enhanced PLA+ formulation
  • Reliable feeding from clog-free, bubble-free, tangle-free spool
  • Filament stays dry in vacuum-sealed pack with desiccant
  • Works on most FDM printers at 200-210 °C nozzle temperature

What the filament is and who uses it

JG MAKER PLA+ is a 1.75 mm green filament supplied on a 1 kg spool weighing 2.2 lbs. It is formulated as a tougher, harder variant of standard PLA for makers who need stronger printed parts. The material works with most FDM 3D printers and 3D pens, making it a practical choice for hobbyists and small workshops.

Behaviour during long prints

Dimensional accuracy is held to +/- 0.02 mm, with the supplier title also noting +/- 0.03 mm, so extrusion stays consistent over extended jobs. The spool is produced by full mechanical winding and manual inspection to remain clog-free, bubble-free and tangle-free. Recommended nozzle temperature is 200-210°C and bed temperature 50-60°C for reliable layer adhesion throughout a build.

Packaging, storage and daily handling

Each spool ships vacuum-sealed with a desiccant pack to keep moisture out until opened. The maker advises unpacking only when ready to print and resealing in a plastic bag if the filament will sit unused for a while. This care routine preserves print quality and prevents nozzle blockages caused by absorbed humidity.

Highlights

  • Precise prints with ±0.02 mm dimensional accuracy
  • Stronger, tougher parts using enhanced PLA+ formulation
  • Reliable feeding from clog-free, bubble-free, tangle-free spool
  • Filament stays dry in vacuum-sealed pack with desiccant
  • Works on most FDM printers at 200-210 °C nozzle temperature

Specifications

ColorGreen

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much heat does the 1.75 mm PLA+ spool add to the printer enclosure during long prints?

The filament itself generates no heat; only the hotend at 200-210 °C and the heated bed at 50-60 °C warm the enclosure.

Does this 1 kg Green PLA+ require a specific nozzle size or direct-drive extruder to work?

It works with any standard 1.75 mm FDM hotend; no special nozzle or extruder type is required.

Will the +/- 0.02 mm tolerance cause jams in an older Bowden setup with a worn PTFE tube?

The tight tolerance and mechanical winding reduce friction, so it feeds reliably even through aged Bowden tubes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.