We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A gray 1 kg spool of 1.75 mm PLA+ filament, vacuum sealed with desiccant

JG MAKER

JG MAKER PLA+ 1.75 mm 1 kg Gray filament

SKU CH-REBY-QK7YY

PLA+ filament in 1.75 mm diameter on a 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • ColorGray

Color Gray

  • Consistent extrusion with ±0.02 mm dimensional accuracy
  • Stronger, tougher prints than standard PLA
  • Vacuum-sealed spool with desiccant prevents moisture
  • Works on all FDM printers and 3D pens
  • Ready at 200–210 °C nozzle, 50–60 °C bed

Filament type and spool size

JG MAKER PLA+ is a 1.75 mm diameter filament supplied on a 1 kg spool weighing 2.2 lbs. The material is a modified PLA blend that is harder and tougher than standard PLA. It is produced with full mechanical winding and manual inspection to reduce clogging, bubbles and tangles. The spool arrives vacuum-sealed with a desiccant pack to limit moisture absorption.

Compatibility and storage needs

The filament works with most FDM 3D printers and 3D pens that accept 1.75 mm stock. Recommended nozzle temperature is 200-210°C with a bed temperature of 50-60°C. Users who require a different diameter, a larger spool or a material with higher heat resistance should consider other options. The vacuum seal should remain intact until printing begins and the spool should be resealed with desiccant during storage.

Dimensional consistency over long prints

Manufacturing tolerance is held to ±0.02 mm, while the supplier title also references ±0.03 mm as a broader specification. This tight control helps maintain steady extrusion during extended print jobs without frequent diameter-related adjustments. The clog-free and tangle-free winding supports continuous feeding on spool holders that impose minimal drag. Moisture protection from the sealed packaging preserves consistent flow characteristics across multiple sessions.

Highlights

  • Consistent extrusion with ±0.02 mm dimensional accuracy
  • Stronger, tougher prints than standard PLA
  • Vacuum-sealed spool with desiccant prevents moisture
  • Works on all FDM printers and 3D pens
  • Ready at 200–210 °C nozzle, 50–60 °C bed

Specifications

ColorGray

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What printer hardware do I need to run this 1.75 mm PLA+ spool?

Any FDM 3D printer or 3D pen that accepts 1.75 mm filament will work with this spool.

Can I keep my current 50-60 °C heated bed when switching to this material?

Yes, the recommended bed range of 50-60 °C matches typical PLA settings, so no change is required.

How do I verify the filament is feeding correctly after loading?

Check that the first layers extrude smoothly at 200-210 °C nozzle temperature with no clogging or bubbles, and measure the filament diameter to confirm it stays within ±0.02 mm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.