We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel 30mm momentary push button with blue LED ring, metal nut and O-ring included

JacobsParts Inc.

JacobsParts Inc. LTCH-K8-BLU 30mm Stainless Steel Momentary Push Button Disconnect with Blue LED

SKU CH-YEZN-1527C MPN LTCH-K8-BLU

30 mm stainless-steel momentary push button rated 250 V 5 A with IP67 protection and a 12 V blue LED

  • TypePushbutton
  • Amps5 Amps
  • Voltage250 Volts
  • MaterialMetal
  • Momentary action gives precise on-demand control
  • IP67 rating protects against heavy rain and splashes
  • Stainless steel body resists corrosion in harsh environments
  • 250V 5A rating handles mains and low-voltage circuits
  • Blue LED can stay on or light only when pressed

30mm IP67 Momentary Switch for Panels

This stainless-steel pushbutton fits a 30mm panel cutout and carries a 5 A, 250 V AC/DC rating. A blue LED runs independently at 12 V DC and 15 mA. The single-pole, single-throw action is normally open and momentary, making it suitable for starter, horn or PC power duties in automotive, marine and electronics projects.

Drill 30mm Hole, Secure with Nut and O-Ring

Cut the mounting hole with a 1-3/16 inch bit, thread the 18 mm neck through the panel and tighten the supplied metal nut from the rear. The rubber O-ring seats behind the 34 mm faceplate for extra water resistance. Wiring the LED separately from the switch contacts avoids the common error of powering the indicator from the load circuit.

IP67 Seal Holds Up to Continuous Exposure

The IP67 rating means the switch withstands prolonged immersion and heavy spray without ingress. Stainless-steel construction resists corrosion across the -20 °C to 55 °C operating range. Because the contacts are rated for the full 5 A continuously, the switch does not derate during long activations such as winch controls or sustained lighting circuits.

Highlights

  • Momentary action gives precise on-demand control
  • IP67 rating protects against heavy rain and splashes
  • Stainless steel body resists corrosion in harsh environments
  • 250V 5A rating handles mains and low-voltage circuits
  • Blue LED can stay on or light only when pressed

Specifications

TypePushbutton
Amps5 Amps
Voltage250 Volts
MaterialMetal
BrandJacobsParts
ModelLTCH-K8-BLU

Questions about this item

How do I confirm the blue LED is receiving the correct 12V DC 15mA supply after wiring?

Measure the LED terminals with a multimeter; a reading of 12V DC with roughly 15mA current draw while the button is pressed shows the LED circuit is powered correctly.

What hardware comes in the package and what must I source separately?

The box contains the stainless steel switch, a metal securing nut and a rubber O-ring; you must supply your own 1-3/16" drill bit, wiring, connectors and a 12V DC power source for the LED.

Which version should I choose for a 250V 5A momentary circuit with IP67 sealing?

This single model LTCH-K8-BLU provides a 30mm SPST normally-open momentary action rated 250V AC/DC 5A with IP67 protection, so it covers that requirement without further options.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.