JacobsParts Inc.
JacobsParts Inc. LTCH-I4-BLU Momentary Pushbutton Disconnect 19mm IP67 250V 5A Blue LED 12V
Momentary 19mm metal pushbutton switch rated IP67 waterproof with blue 12V LED, 250V 5A SPST contacts for automotive or marine panels
- TypePushbutton
- Amps5 Amps
- Voltage250 Volts
- MaterialMetal
- IP RatingIP67
- FeaturesWaterproof
- Momentary action gives instant control with spring return
- IP67 rating withstands heavy rain and splashes
- Blue LED runs on 12 V at 15 mA
- Fits 19 mm panel cutout with 22 mm faceplate
- Rated 250 V AC/DC at 5 A for robust switching
Momentary Pushbutton Switch
The JacobsParts LTCH-I4-BLU is a momentary pushbutton disconnect rated for 250V AC/DC at 5A. It features a blue LED indicator powered by 12V DC at 15mA. The switch suits automotive, marine and electronics projects requiring a momentary ON-NONE-OFF action.
Panel Cutout and Wiring Check
Verify your panel allows a 19mm diameter cutout with 17.5mm thread depth. Ensure the 40mm total depth behind the panel clears internal components. Confirm wiring uses screw terminals and that the separate LED circuit matches a 12V DC supply. The contact type is normally open SPST.
Metal Build and Sealed Mounting
The nickel-plated copper enclosure provides IP67 protection against heavy rain and splashes. An included rubber O-ring adds extra sealing between the faceplate and panel. A metal nut secures the threaded neck from the reverse side. Operating temperature spans -20C to 55C.
Highlights
- Momentary action gives instant control with spring return
- IP67 rating withstands heavy rain and splashes
- Blue LED runs on 12 V at 15 mA
- Fits 19 mm panel cutout with 22 mm faceplate
- Rated 250 V AC/DC at 5 A for robust switching
Specifications
| Type | Pushbutton |
|---|---|
| Amps | 5 Amps |
| Voltage | 250 Volts |
| Material | Metal |
| IP Rating | IP67 |
| Brand | JacobsParts |
| Model | LTCH-I4-BLU |
| Features | Waterproof |
Questions about this item
What comes in the box and what must be purchased separately?
The package includes the switch, a metal mounting nut and a rubber O-ring for extra water resistance. No wiring, connectors or LED power supply are included and must be sourced separately.
Which version should I choose for a 19mm panel cutout with a blue LED?
This model LTCH-I4-BLU is the only version listed; it fits a 19mm cutout, has a blue LED rated at 12V DC 15mA and a momentary SPST action.
What does the 250V 5A rating mean when the switch is installed in a 12V vehicle system?
The contacts are rated for up to 250V AC/DC at 5A; at 12V the same 5A contact limit applies, so the switch can handle loads within that current limit on a 12V circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



