We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium desoldering pump with teflon tip, 8.5 in long

JacobsParts Inc.

JacobsParts Inc. DSP-A Desoldering Pump 8.5 in

SKU CH-4345-9Z6J2

A spring-loaded desoldering pump with an 8.5 in aluminium body and heat-resistant teflon tip removes solder from circuit boards with one-button suction

  • TypeDesoldering Pump
  • FeaturesDesoldering Removal Tool
  • Aluminium body resists wear during frequent desoldering tasks
  • Teflon tip withstands high soldering temperatures without degrading
  • Powerful suction clears solder from circuit boards efficiently
  • Simple lock-and-press action speeds up rework workflow
  • Compact 8.5 in length fits tight workbench spaces

Desoldering Pump for PCB Repair

The JacobsParts DSP-A is a spring-loaded vacuum tool built to pull molten solder away from through-hole joints on printed circuit boards. Its aluminium body and heat-resistant teflon tip withstand repeated contact with a hot iron, making it suited for hobbyists and technicians who rework or salvage components.

Thermals Noise and Power

The pump operates mechanically with no motor, fan or electrical supply, so it adds no heat, noise or power draw to the bench. The teflon tip tolerates soldering-iron temperatures during the few seconds of each desoldering cycle, while the aluminium barrel stays cool enough to hold comfortably.

Build Fit and Workflow

At 8.5 in. long and 0.8 in. diameter the tool fits in a standard tool tray or drawer and reaches tight board corners without demanding extra clearance. The single-button trigger lets the user prime, position and fire with one hand, freeing the other hand to hold the iron and keeping the work area uncluttered.

Highlights

  • Aluminium body resists wear during frequent desoldering tasks
  • Teflon tip withstands high soldering temperatures without degrading
  • Powerful suction clears solder from circuit boards efficiently
  • Simple lock-and-press action speeds up rework workflow
  • Compact 8.5 in length fits tight workbench spaces

Specifications

BrandJacobsParts
ModelDSP-A
TypeDesoldering Pump
FeaturesDesoldering Removal Tool

Questions about this item

How do I lock the tension bar before desoldering with the DSP-A?

Push the end of the tension bar toward the nozzle until it clicks into place, then position the 0.8 in. Teflon tip on the joint and press the button to fire the suction.

Which part of the DSP-A wears out and needs replacing?

The heat-resistant Teflon nozzle tip degrades with repeated high-temperature contact; keep a spare 0.8 in. tip on hand for quick swaps.

What limits the DSP-A during a long desoldering session?

The single-shot spring mechanism requires manual re-cocking after every pull, so sustained work is paced by how fast you can reset the 8.5 in. barrel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.