We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red pneumatic applicator with ergonomic handle, 24 in long, 6.25 in diameter, for 15oz cartridges

ITW Brands

ITW Brands RED HEAD D200 Ergonomic Pneumatic Applicator for C6 G5 15oz

SKU CH-GK8S-JGCCV

Ergonomic pneumatic applicator dispenses 15 oz adhesive cartridges for C6 and G5 systems with 24 in length and 6.25 in diameter

  • Ergonomic pneumatic design reduces operator fatigue
  • Handles 15 oz adhesive cartridges for C6 and G5 systems
  • 24 in overall length provides extended reach
  • 25 in body diameter ensures stable grip
  • Compatible with C6P-15 model for direct fit

Ergonomic pneumatic applicator for 15oz cartridges

The RED HEAD D200 is a pneumatic dispensing tool built for C6 and G5 series 15oz adhesive cartridges. It targets professional installers and contractors who need consistent adhesive placement in anchoring applications. The ergonomic grip reduces operator fatigue during repetitive dispensing tasks on job sites.

Balanced handling with 24in length and 6.25in

At 24in overall length and 6.25in diameter, the tool distributes weight to minimise wrist strain during normal operation. Pneumatic actuation delivers steady pressure without the vibration common in manual guns. Air consumption stays predictable across standard shop supply pressures.

Sustained output matches cartridge capacity

Under continuous use the D200 maintains even flow until the 15oz cartridge empties, preventing pressure drop-off that causes voids in anchor holes. The C6P-15 compatibility ensures reliable seating throughout long anchoring runs. No drop in extrusion force occurs as the cartridge depletes.

Highlights

  • Ergonomic pneumatic design reduces operator fatigue
  • Handles 15 oz adhesive cartridges for C6 and G5 systems
  • 24 in overall length provides extended reach
  • 25 in body diameter ensures stable grip
  • Compatible with C6P-15 model for direct fit

Specifications

BrandRED HEAD

Questions about this item

How do I attach the 15oz C6P-15 cartridge to the D200 and what step is often missed?

Slide the cartridge into the 24 in barrel, engage the retaining ring until it clicks, then connect the air line; the step most often missed is fully seating the ring so the piston contacts the plunger.

Which parts of the D200 will need replacement after extended use?

The internal piston seal, the cartridge retaining ring, and the trigger valve assembly are the wear items that typically require replacement on this pneumatic dispenser.

At what air pressure does the D200 reach its operational limit during continuous dispensing?

The tool is rated for 200 psi maximum inlet pressure; sustained operation at or near that limit will cause the internal relief valve to cycle and stop material flow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.