We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow slim Cat6 patch cable with RJ45 connectors, 7 ft length

Intellinet Network Solutions

Intellinet Network Solutions Cat6 U/UTP Slim Patch Cable 7 ft Yellow 10G 250 MHz 30 AWG

SKU CH-0KT7-JNBVF

A 7 ft Cat6 U/UTP slim patch cable with 30 AWG stranded copper conductors, gold-plated RJ45 connectors, snag-free boots and 250 MHz bandwidth for 10G Ethernet and PoE++ up to IEEE 802.3bt

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length7 ft.
  • ColorYellow
  • Cat6 250 MHz bandwidth supports 10 Gbps speeds
  • 30 AWG slim profile simplifies dense cable management
  • 100 % bare copper conductors ensure maximum conductivity
  • Gold-plated RJ45 contacts resist corrosion for reliable links
  • Snag-free boots protect connectors during installation and removal

Intellinet Cat6 Slim Patch Cable 7 ft

This Cat6 U/UTP slim patch cable measures 7 ft and uses 30 AWG stranded conductors with gold-plated RJ45 connectors. It supports 10G speeds at 250 MHz bandwidth and meets ISO/IEC 11801 and EN 50288 standards. The yellow jacket aids colour-coded network management. It is suited for installers needing flexible cabling in dense racks or HDBaseT and PoE++ deployments up to IEEE 802.3bt.

Check connector spacing

The ultra-thin 30 AWG construction reduces bulk but requires careful handling near sharp edges or tight bends. Verify that your patch panels and switches accept snag-free boots without interference. Ensure the 7 ft length matches your rack-to-device distance without excess slack. Confirm T568A or T568B wiring scheme compatibility with existing infrastructure.

Sustained load behaviour in PoE and 10G links

Pure bare copper conductors maintain stable conductivity during continuous 10G transmission and high-power PoE++ sessions up to IEEE 802.3bt. Gold-plated contacts resist oxidation that can degrade signal integrity over time. Heavy-duty strain relief protects the termination point from fatigue caused by vibration or repeated movement. The unshielded design relies on balanced pair geometry for noise rejection in typical indoor environments.

Highlights

  • Cat6 250 MHz bandwidth supports 10 Gbps speeds
  • 30 AWG slim profile simplifies dense cable management
  • 100 % bare copper conductors ensure maximum conductivity
  • Gold-plated RJ45 contacts resist corrosion for reliable links
  • Snag-free boots protect connectors during installation and removal

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length7 ft.
ColorYellow
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

Does the cable come with any extra accessories or do I need to buy RJ45 connectors separately?

The cable is supplied with RJ45 connectors already fitted at both ends, so no separate connectors are required.

Which specification should I check to match my 10G network — the 250 MHz rating or the Cat6 label?

Both apply; the cable is Cat6 rated for 250 MHz bandwidth and supports 10G speeds up to the specified length.

Will the 30 AWG stranded conductors handle PoE++ power without overheating in a 7 ft run?

Yes, the pure copper stranded wires are rated for IEEE 802.3bt PoE++ and the short 7 ft length keeps voltage drop minimal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.