Intellinet Network Solutions
Intellinet Network Solutions Cat6 U/UTP Slim Network Ethernet Cable 3 ft White 10-Pack 250 MHz 30 AWG
Ten 3 ft Cat6 U/UTP slim patch cables with 30 AWG stranded copper, gold-plated RJ45 contacts, snag-free boots and 250 MHz bandwidth for 10G PoE++ runs
- TypeNetwork Ethernet Cables
- Cat6
- Connector ARJ45
- Connector BRJ45
- Length3 ft.
- ColorWhite
- Supports 10G speeds with 250 MHz bandwidth
- Pure bare copper conductors ensure maximum conductivity
- Gold-plated contacts resist corrosion for reliable connections
- Snag-free boots protect RJ45 connectors during installation
- Ultra-thin 30 AWG design simplifies cable management in dense setups
Ten-pack of 3 ft Cat6 slim patch cables
This ten-pack supplies ten white Cat6 U/UTP cables, each three feet long, for short-run connections in cabinets or on desks. The slim 30 AWG stranded conductors make the cables easy to route through tight cable managers and around corners. Gold-plated RJ45 contacts on both ends resist corrosion for long-term signal integrity. The pack suits installers who need multiple identical jumpers for structured cabling jobs.
Sustained 10 Gbps throughput at 250 MHz bandwidth
The cables meet ISO/IEC 11801 and EN 50288 Category 6 requirements, supporting 10 Gbps Ethernet across the full 250 MHz bandwidth. Pure bare copper conductors maintain consistent conductivity during continuous high-speed data streams. Heavy-duty strain relief and snag-free boots protect the termination points when cables are moved or re-seated under load. Performance remains stable in PoE++ environments up to IEEE 802.3bt power levels.
Ultra-thin unshielded build with snag-free RJ45 ends
The 30 AWG stranded wire yields a noticeably thinner diameter than standard Cat6, simplifying bundle management in dense racks or wall plates. Unshielded U/UTP construction keeps the cables light and flexible but offers no EMI shielding for electrically noisy runs. Snag-free boots prevent the latch tabs from catching on adjacent cables during pulls. Both T568A and T568B colour codes are supported for straight-through wiring.
Highlights
- Supports 10G speeds with 250 MHz bandwidth
- Pure bare copper conductors ensure maximum conductivity
- Gold-plated contacts resist corrosion for reliable connections
- Snag-free boots protect RJ45 connectors during installation
- Ultra-thin 30 AWG design simplifies cable management in dense setups
Specifications
| Brand | Intellinet Network Solutions |
|---|---|
| Model | Slim Ethernet Cable - Multi-Pack |
| Type | Network Ethernet Cables |
| Cat | 6 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 3 ft. |
| Color | White |
| Shielded | No |
| Features | 10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Gold-plated Contacts, 10-Pack |
Questions about this item
Does the 30 AWG slim construction affect heat or power delivery when the cable runs all day under PoE++ loads?
The 30 AWG pure copper conductors support IEEE 802.3bt PoE++ up to 100 W without overheating in normal indoor use.
What devices or ports must I already have to use these Cat6 RJ45 cables at 10G speeds?
Both ends need 10G-capable RJ45 ports — switches, routers, servers or NICs — and the link will negotiate down to 1G if either side is slower.
Will these white Cat6 patch cables work reliably with older Cat5e or Cat5 wall plates and keystones I already have installed?
Yes, they are fully backward compatible with Cat5e and Cat5 components and follow T568A/B wiring standards.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SATACables MSD-887 micro SATA extension cable 20 inch 46mm SATA 2.6
- 1.66 ft.
eForChina 19V 4.74A 90W UK Plug AC Adapter 5.5x2.5mm Black
- Black
- Power Adapter



