Inkbird COMINHKPR111236 HVAC control 110V 10A 1100W 12 pack
A 12-pack of dual-relay temperature controllers with heating and cooling outputs, buzzer alarms, and °C/°F display for 110 V equipment up to 1100 W
- Typetemperature probe, socket, controller panel, Heating and Coo
- Size/Dimensions1.2 in x 2.6 in x 6.7 in
- ColorBlack
- Voltage110V
- Mount TypeWall Mount
- Relay ContactDigital, 110 volts
- Dual relay controls heating and cooling equipment automatically
- Dual display shows measured and set temperature simultaneously
- Buzzer alarm alerts on high or low temperature limits
- 1100 W maximum output protects connected refrigeration and heating gear
- 12-pack provides multiple controllers for larger installations
12-Pack Digital Temperature Controller
This 12-pack of Inkbird ITC-308 controllers manages heating and cooling equipment in homebrew fermenters, greenhouses, terrariums and similar environments. Each unit provides dual-relay output so a single device can switch both a heater and a chiller as conditions change. The plug-and-play design suits hobbyists and small-scale operators who need repeatable temperature management across multiple stations.
Thermals Noise and Power Draw
The controller itself consumes minimal power while its relays handle up to 10 A at 110 V for a maximum load of 1100 W. No fan or moving parts are present, so operation is silent. The enclosure measures 1.2 in by 2.6 in by 6.7 in and mounts on a wall, keeping the electronics away from direct heat sources.
Dual Relay 10A 1100W Output
The decisive specification is the dual-relay capacity of 10 A per channel at 110 V, giving 1100 W total switching power. This determines whether your heater, chiller, exhaust fan or heating wrap can be driven directly without an external contactor. Buyers who need higher amperage or three-phase switching must look elsewhere.
Highlights
- Dual relay controls heating and cooling equipment automatically
- Dual display shows measured and set temperature simultaneously
- Buzzer alarm alerts on high or low temperature limits
- 1100 W maximum output protects connected refrigeration and heating gear
- 12-pack provides multiple controllers for larger installations
Specifications
| Type | temperature probe, socket, controller panel, Heating and Cooling, Push Button |
|---|---|
| Brand | Inkbird, Inkbird Tech |
| Model | COMINHKPR111236 |
| Size/Dimensions | 1.2 in x 2.6 in x 6.7 in |
| Color | Black |
| Voltage | 110V |
| Mount Type | Wall Mount |
| Relay Contact | Digital, 110 volts |
| Standards/Certifications | not_capable_emitting_rf_energy |
| Item Count | 12 pack |
| Selling Unit | Roll |
| Features | freezer, heating wrap, exhaust fan, Temperature Display, Inkbird |
| Part Number | ITC 308 11 |
Questions about this item
How do I wire the heating and cooling sockets on the ITC-308, and which step do people often miss?
Plug the controller into a 110 V outlet, then connect heating equipment to the heating socket and cooling equipment to the cooling socket; the step often missed is setting the compressor delay to protect the compressor from short-cycling.
What maintenance will the temperature probe need over time?
The probe has no moving parts and requires no scheduled maintenance; if readings drift, replace the probe with a compatible NTC sensor.
At what load does the relay become the limiting factor during continuous operation?
The relay contact capacity is 10 A at 110 V, so the 1100 W maximum output load is the first limit reached under sustained use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213107BTC
In stock