We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium tool balancer with stainless steel cable and spring clip, suspended by shackle

Ingersoll/Rand

Ingersoll/Rand BMDS-2 Tool Retractor 3.0-5.0 Lb 6.5 Ft

SKU CH-YAMJ-KQHZ3

Tool balancer supports 2.2 to 5.5 lb loads with a 6.5 ft stainless steel cable and aluminium housing

  • TypeTarps
  • Balances tools from 2.2 to 5.5 lb for ergonomic use
  • 5 ft stainless steel cable gives wide reach at the station
  • Aluminium housing keeps the unit light at 11 in retracted height
  • Fixed rotation design simplifies mounting on a suspension shackle
  • Spring clip attachment secures the tool without a locking mechanism

Ingersoll/Rand BMDS-2 Tool Retractor

The Ingersoll/Rand BMDS-2 tool retractor suspends hand tools weighing between 2.2 lb and 5.5 lb. A 6.5 ft stainless-steel cable allows free movement while keeping the tool within reach. The aluminium housing mounts via a suspension shackle for fixed-position installation.

Thermals noise and power draw

This mechanical balancer operates without electricity so it produces no heat and no audible motor noise. Spring tension handles the tool weight passively. No power supply or wiring is required for normal use.

Weight range 2.2 to 5.5 lb

The retractor only supports tools between 2.2 lb and 5.5 lb. Heavier equipment will exceed the spring capacity and lighter tools will not retract reliably. Buyers needing a wider weight range or a locking reel must choose a different model.

Highlights

  • Balances tools from 2.2 to 5.5 lb for ergonomic use
  • 5 ft stainless steel cable gives wide reach at the station
  • Aluminium housing keeps the unit light at 11 in retracted height
  • Fixed rotation design simplifies mounting on a suspension shackle
  • Spring clip attachment secures the tool without a locking mechanism

Specifications

BrandIngersoll-Rand
TypeTarps

Questions about this item

How do I mount the BMDS-2 retractor and what step is often missed?

Hang the unit from an overhead support using the suspension shackle; the step often missed is verifying the tool weight falls between 2.2 and 5.5 lb before attaching the spring clip.

What part of the BMDS-2 will need replacement first?

The stainless-steel cable is the wear item; inspect it regularly for fraying or kinks and replace the cable assembly when damage appears.

At what point does the 6.5 ft cable stop extending under constant pull?

The cable reaches its hard stop at 6.5 ft; beyond that the internal spring cannot pay out more line.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.