We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver pneumatic chisel scaler with lever throttle and bayonet housing lock

Ingersoll/Rand

Ingersoll/Rand 182L Chisel Scaler 13.0 CFM 1-1/16 In. Stroke

SKU CH-9GE9-GVZPA

Air-powered chisel scaler delivers 4,000 blows per minute with a 1-1/16 inch stroke for heavy-duty surface preparation

  • MaterialHAWA
  • Industrial-duty construction handles heavy scaling jobs
  • 4,000 blows per minute removes material quickly
  • 1-1/16 inch stroke delivers strong impact force
  • 0 CFM at full load powers demanding tasks
  • Ergonomic in-line design improves operator control

13.0 CFM Chisel Scaler

The Ingersoll/Rand 182L is an in-line pneumatic chisel scaler built for industrial duty. It delivers a 1-1/16 inch stroke at 4,000 blows per minute for heavy material removal. The tool accepts a 1/2 inch square shank and uses a bayonet needle housing lock. Operators needing a compact, lever-throttle scaler for surface preparation will find it suitable.

Air consumption and duty limits

At full load the scaler draws 13.0 CFM at 90 psi, while the 15-second average is 6.5 CFM. A minimum 5/16 inch hose is required to maintain pressure. The industrial duty cycle supports extended use, but the 1/4 inch NPT inlet restricts maximum flow. Shops without a compressor capable of 13 CFM continuous delivery cannot run this tool at rated performance.

Upgrade path and fit

This model replaces lower-CFM scalers when faster scaling speed is needed on steel structures. It is compatible with manufacturer accessories 380, 382, 383, 383-12 and 384. The jump is worth it when the current tool stalls under load or lacks the stroke length for thick coatings. Buyers who need lower air consumption or a pistol-grip handle should consider other configurations.

Highlights

  • Industrial-duty construction handles heavy scaling jobs
  • 4,000 blows per minute removes material quickly
  • 1-1/16 inch stroke delivers strong impact force
  • 0 CFM at full load powers demanding tasks
  • Ergonomic in-line design improves operator control

Specifications

BrandINGERSOLL RAND
MaterialHAWA

Questions about this item

Will the 1/4 in NPT air inlet connect directly to my existing 5/16 in hose?

The scaler has a 1/4 in NPT inlet; the manufacturer specifies a minimum hose size of 5/16 in, so use a suitable fitting or adapter to match your hose.

How can I confirm the tool is delivering the rated 4,000 blows per minute at 90 psi?

At 90 psi supply pressure the scaler runs at 4,000 BPM; verify with a calibrated pressure gauge at the inlet and listen for the rapid, steady hammering sound.

Which chisels are included and what must I purchase separately?

The box contains the 182L scaler body only; compatible chisels such as Mfr. No. 380, 382, 383, 383-12 or 384 are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.