We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver pneumatic chisel scaler with pistol grip and lever trigger

Ingersoll/Rand

Ingersoll/Rand 170PG-CS Chisel Scaler 5.5 CFM

SKU CH-WGTZ-RDE98

An industrial-duty air chisel scaler delivering 3,000 blows per minute with a 1-5/8 in stroke at 5.5 CFM

  • MaterialHAWA
  • Industrial-duty reliability for continuous scaling tasks
  • 3,000 blows per minute remove material quickly
  • 5 CFM at full load matches compressor capacity
  • 1/2-inch square shank accepts standard chisels
  • 12 3/8-inch overall length fits tight workspaces

Chisel Scaler for Industrial Air Systems

The Ingersoll/Rand 170PG-CS is a pistol-grip chisel scaler built for industrial duty cycles. It accepts a 1/2-inch square shank and uses a bayonet needle housing lock for tool retention. The 1-5/8-inch stroke delivers 3,000 blows per minute at 90 psi, suited for surface preparation and material removal in workshops.

Air Consumption and Operating Pressure

Average air consumption measures 3.0 CFM during a 15-second run and reaches 5.5 CFM at full load. The tool requires a minimum 5/16-inch hose and a 1/4-inch NPT inlet to maintain the rated 90 psi supply pressure. Overall length is 12-3/8 inches for handling in confined work areas.

Compatible Chisel Accessories

The scaler is designed for use with manufacturer numbers 380, 382, 383, 383-12 and 384 chisels. Selecting the correct accessory from this series determines the cutting profile and material engagement. Buyers needing shank styles or stroke lengths outside this specified range should verify compatibility before purchase.

Highlights

  • Industrial-duty reliability for continuous scaling tasks
  • 3,000 blows per minute remove material quickly
  • 5 CFM at full load matches compressor capacity
  • 1/2-inch square shank accepts standard chisels
  • 12 3/8-inch overall length fits tight workspaces

Specifications

BrandINGERSOLL RAND
MaterialHAWA

Questions about this item

How do I connect the 1/4 in NPT air inlet and what step is often missed?

Use a 5/16 in minimum hose at 90 psi; the step most people miss is installing a filter-regulator-lubricator unit before the tool to prevent moisture and grit from damaging the mechanism.

Which wear parts on the 170PG-CS will need replacement over time?

The chisel shank that fits the 1/2 in square drive and the bayonet needle housing lock are the primary wear items; keep spares matching Mfr. No. 380, 382, 383, 383-12 or 384 on hand.

At 3,000 blows per minute, what limit appears first during continuous scaling work?

The 5.5 CFM full-load air demand is the first bottleneck; if the compressor cannot sustain that flow, the tool drops power long before the 1 5/8 in stroke or housing overheats.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.