We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver pneumatic hammer with pistol grip and round shank

Ingersoll/Rand

Ingersoll/Rand 116 Air Hammer

SKU CH-GFHG-NX1TJ

A general-duty air hammer with a 0.401 in round shank, 2 5/8 in stroke and 3,500 blows per minute at 90 psi

  • TypeAngle, Pitch & Slope Locators
  • General-duty air hammer for versatile shop tasks
  • 3,500 blows per minute delivers fast material removal
  • 2 5/8 in stroke length provides strong impact force
  • 401 in round shank accepts common chisel bits
  • 0 CFM average consumption suits standard compressors

Ingersoll Rand 116 Air Hammer

The Ingersoll Rand 116 is a general-duty pneumatic hammer built for automotive and metalworking tasks. It suits technicians who need a compact tool for cutting, chipping or rivet removal with a standard 0.401-inch round shank.

2-5/8 inch stroke and 3,500 blows per minute

This hammer delivers a 2-5/8 inch stroke at 3,500 blows per minute, making the stroke length the key figure for judging whether the impact force matches the material thickness you are working on.

1/4 inch NPT inlet with 3/8 inch minimum hose

Connect the 1/4 inch NPT air inlet to a hose of at least 3/8 inch inner diameter and supply 90 psi; undersized hose or low pressure are the most common causes of reduced blow rate and premature wear.

Highlights

  • General-duty air hammer for versatile shop tasks
  • 3,500 blows per minute delivers fast material removal
  • 2 5/8 in stroke length provides strong impact force
  • 401 in round shank accepts common chisel bits
  • 0 CFM average consumption suits standard compressors

Specifications

BrandINGERSOLL RAND
TypeAngle, Pitch & Slope Locators

Questions about this item

How does the 3,500 blows-per-minute rate translate to real-world material removal?

At 3,500 BPM the tool delivers rapid, short strokes suited for light chipping, rivet cutting and sheet-metal work rather than heavy demolition.

What does the 1/4 in NPT air inlet and 90 psi requirement mean for my compressor setup?

The 1/4 in NPT inlet accepts standard quick-connect fittings, and 90 psi operating pressure is within the range of most portable and shop compressors.

Will the 0.401 in round shank accept the chisels I already own?

The 0.401 in round shank is the industry-standard size for general-duty air hammers, so most common chisel sets will fit directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.