We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green flexible-shank nutdriver with dual 1/4 and 5/16 in magnetic tips

Ideal

Ideal 9999V Nutdriver Flexible Shank 1/4 5/16 in

SKU CH-FT50-T4JMQ MPN 9999V

A flexible-shank nutdriver with magnetic tips that hold 1/4 and 5/16 inch fasteners in tight spaces

  • TypeNut Drivers
  • Color/FinishGreen
  • Flexible shank reaches tight hose clamps easily
  • Dual 1/4 and 5/16 inch tips cover common fasteners
  • Magnetized tip holds nuts securely during placement
  • Green finish identifies the tool quickly in a kit
  • 6 1/2 inch shank length provides extended reach

Versatile Nut Driver for SAE Fasteners

The Ideal 9999V nut driver handles both 1/4 in and 5/16 in SAE fasteners with a single tool. Its flexible round shank reaches around obstructions where a straight driver cannot fit. A magnetised tip holds the nut or bolt during placement, reducing dropped hardware. The green finish provides quick visual identification in a mixed tool set.

Manual Operation With Low Physical Demand

Hand-driven use produces no motor noise, vibration or electrical draw. The flexible shank absorbs some torque reaction, lowering wrist strain during repeated tightening. No batteries, chargers or compressed-air supply are required, so the tool is ready whenever the fastener is accessible. Operation stays consistent regardless of ambient temperature.

Compact Addition to Any Toolkit

At 6 1/2 in shank length the driver stores in shallow trays or pouches without consuming deep drawer space. The dual-tip capability replaces two fixed nut drivers, freeing organiser slots for other tools. No special sockets, adapters or power sources are needed, keeping the surrounding kit simple. The plain shank works with standard SAE hardware across automotive and general maintenance tasks.

Highlights

  • Flexible shank reaches tight hose clamps easily
  • Dual 1/4 and 5/16 inch tips cover common fasteners
  • Magnetized tip holds nuts securely during placement
  • Green finish identifies the tool quickly in a kit
  • 6 1/2 inch shank length provides extended reach

Specifications

BrandIdeal
Model9999V
TypeNut Drivers
Color/FinishGreen

Questions about this item

How do I install the flexible shank nutdriver on a hose clamp, and what step is often missed?

Slide the magnetic tip onto the fastener, then rotate the 6 1/2 in flexible shank to reach the clamp; the step often missed is keeping the shank straight while starting the turn to prevent binding.

What maintenance or replacement will the Ideal 9999V need over time?

The magnetized tip can lose holding strength after heavy use, and the flexible shank may develop permanent bends; replace the tool when the tip no longer grips 1/4 in or 5/16 in fasteners securely.

What limit appears first during sustained use of the flexible shank nutdriver?

The 6 1/2 in flexible shank transmits less torque than a rigid driver, so the practical limit is reached when the shank twists instead of turning stubborn 1/4 in or 5/16 in hose clamps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.