We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten stainless steel worm gear hose clamps with zinc-plated screws

Ideal

Ideal 6Y004 Worm Gear Hose Clamp SS 201 PK10

SKU CH-W6P6-A4YWB MPN 6Y004

Pack of ten stainless-steel worm-gear hose clamps sized for 5/16 to 5/8 inch diameters with 1/2 inch band width

  • TypeClamps
  • Worm-gear design gives precise tightening
  • Stainless-steel 201 band resists corrosion
  • Perforated 1/2 in band fits 5/16 to 5/8 in diameters
  • Zinc-plated steel screw withstands 500 °F
  • Pack of 10 clamps covers multiple jobs

10-pack stainless steel worm gear clamps

This set contains ten worm gear hose clamps made from 201 grade stainless steel band material. The perforated band is 0.023 in thick and 1/2 in wide. Each clamp uses a zinc-plated steel screw with a turn-key drive. They are rated SAE number 4 for general purpose use.

Suits 5/16 to 5/8 in hose IDs.

These clamps adjust from a minimum inside diameter of 5/16 in to a maximum of 5/8 in. The 301 stainless steel housing resists corrosion up to 500 degrees F. Builders needing to secure hoses outside this range or requiring a different SAE rating should look at other options.

5/16 to 5/8 in clamping range decides fit

The single specification that determines compatibility is the adjustable inside diameter span of 5/16 in to 5/8 in. Verify your hose outer diameter falls within this window before purchasing. The SAE 4 designation confirms the clamp meets standard general-purpose dimensions.

Highlights

  • Worm-gear design gives precise tightening
  • Stainless-steel 201 band resists corrosion
  • Perforated 1/2 in band fits 5/16 to 5/8 in diameters
  • Zinc-plated steel screw withstands 500 °F
  • Pack of 10 clamps covers multiple jobs

Specifications

BrandIdeal
Model6Y004
TypeClamps

Questions about this item

How can I confirm the worm gear clamp is installed correctly on a hose?

Tighten the turn-key screw until the 1/2 in wide perforated band grips the hose evenly; the clamp should hold firmly between the 5/16 in minimum and 5/8 in maximum inside diameters without slipping.

What comes in the pack and what extra items are needed for installation?

The package contains ten stainless steel worm gear clamps; a turn key or suitable screwdriver is required to drive the zinc-plated steel screw but is not included.

Which SAE size should I select for a 5/8 in hose connection?

Choose the SAE 4 size, which covers a minimum inside diameter of 5/16 in and a maximum of 5/8 in, matching the stated range for this clamp.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.