We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five stainless steel T-bolt hose clamps SAE 44

Ideal

Ideal 300110225 Hose Clamp SAE 44 PK5 hand tool

SKU CH-PWYF-VJDS8 MPN 300110225

Stainless-steel T-bolt clamp adjusts from 2 1/4 to 2 9/16 in, installs at 75 in-lb, sold in a pack of five

  • TypeClamps
  • Stainless-steel band resists corrosion using grade 301 steel
  • T-bolt design delivers 75 in-lb install torque for secure sealing
  • SAE 44 rating meets industry standard for hose clamping
  • Pack of 16 clamps covers multiple repair jobs
  • 7/16 in hex head allows standard tool installation

SAE 44 T-Bolt Hose Clamps

This pack contains five Ideal 300110225 T-bolt clamps rated to SAE 44. Each clamp adjusts from a minimum inside diameter of 2 1/4 in to a maximum of 2 9/16 in. The 3/4 in wide band uses 301 stainless steel at 0.025 in thickness. A 304 stainless steel screw with a 7/16 in hex head tightens to 75 in-lb.

Who these suit and who they don't

Mechanics securing medium-diameter hose connections on coolant, intake or charge-air systems will find the range and torque rating appropriate. Buyers needing a smaller minimum diameter or a wider adjustment span should look at other clamp sizes. Applications requiring a worm-drive or spring-loaded design are not served by this T-bolt style.

Deciding specification

The clamp minimum inside diameter of 2 1/4 in and maximum of 2 9/16 in is the single figure that determines fit. If the hose outer diameter falls outside this window the clamp cannot seal correctly, regardless of material or torque rating.

Highlights

  • Stainless-steel band resists corrosion using grade 301 steel
  • T-bolt design delivers 75 in-lb install torque for secure sealing
  • SAE 44 rating meets industry standard for hose clamping
  • Pack of 16 clamps covers multiple repair jobs
  • 7/16 in hex head allows standard tool installation

Specifications

BrandIdeal
Model300110225
TypeClamps

Questions about this item

How do I install the Ideal 300110225 T-bolt clamp and what step is often missed?

Slide the clamp over the hose, position it past the bead, then tighten the 7/16 in hex screw to 75 in-lb with a torque wrench; skipping the torque check is the common error.

What maintenance or replacement will the SAE 44 clamp need later?

Inspect the 301 stainless band and 304 stainless screw for corrosion or lost tension at each service interval; replace the clamp if the band shows cracks or the screw no longer holds 75 in-lb.

What limit appears first on the 2 1/4 in to 2 9/16 in clamp during sustained use?

The 75 in-lb install torque ceiling is reached first; exceeding it can stretch the .025 in band or strip the screw threads before the diameter range is fully used.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.