We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular laboratory bath unit with front control panel and circulation fittings

HNZXIB

HNZXIB GYY-5L 5L 200°C laboratory supply

SKU CH-3TQJ-VA8BF MPN GYY-5L

A 5-litre thermostatic circulating bath reaches 200 °C with a sealed magnetic pump delivering 15–20 L/min at 1.45 MPa

  • Temperature RangeRT~240°C
  • Capacity5L
  • Voltage220V
  • Precise temperature control from ambient to 240 °C
  • 5 L reservoir handles oil or water baths
  • Sealed magnetic pump circulates at up to 25 L/min
  • 8 kW heating power reaches temperature quickly
  • 220 V 50/60 Hz supply fits standard lab power

Thermostatic Circulating Bath

The HNZXIB GYY-5L is a 5 L laboratory circulator that provides a thermostatic heat source for water or oil baths. It operates on 220 V mains power with a sealed magnetic pump for continuous fluid circulation.

Suits labs needing external temperature control

This unit fits workflows that require circulating fluid at temperatures up to 240 °C for water or 250 °C for oil. It is not for applications needing a built-in workspace, direct immersion heating or temperature stability tighter than the published range.

2.5 kW heating power at 220 V

The heater draws 10 A and delivers 2.5 kW to reach the stated temperature limits. The magnetic pump produces 1.45 Mpa cycling pressure with a flow rate of 15 to 20 L/min for uniform bath conditions.

Highlights

  • Precise temperature control from ambient to 240 °C
  • 5 L reservoir handles oil or water baths
  • Sealed magnetic pump circulates at up to 25 L/min
  • 8 kW heating power reaches temperature quickly
  • 220 V 50/60 Hz supply fits standard lab power

Specifications

Temperature RangeRT~240°C
Capacity5L
Voltage220V

Questions about this item

Will the 220 V 50/60 Hz supply work with my existing lab bench power?

The unit runs on 220 V 50/60 Hz and draws 10 A, matching common single-phase lab circuits.

How can I verify the GYY-5L is controlling temperature accurately after setup?

The controller shows the set point and actual temperature; accuracy is stated as ±0.5 °C for both water and oil modes.

What comes in the box and what must I source separately?

The circulator, reservoir lid and magnetic pump are included; heat-transfer fluid, tubing and fittings are not supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.