We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HNZXIB

HNZXIB DLSB-5/10 -10°C 5L 110V laboratory supply

SKU CH-AMTF-V79AD MPN DLSB-5/10

A 5 L refrigerated circulator that maintains coolant down to −10 °C with ±0.2 °C precision and a 20 L/min pump for laboratory cooling

  • TypeCooling Chiller
  • Temperature Range-10°C~RT
  • Capacity5L
  • Voltage110V
  • Cools liquid to -10 °C for low-temperature reactions
  • 5 L reservoir supplies continuous circulation at 20 L/min
  • ±0.2 °C precision via microcomputer controller
  • 110 V 60 Hz power with built-in pump protection
  • Wooden-case packaging delivers in 7-14 working days

Laboratory chiller for sub-ambient cooling

The HNZXIB DLSB-5/10 is a refrigerated circulator built for laboratory environments that require liquid temperatures below ambient. It suits chemists and process engineers running rotary evaporators, jacketed reactors or vacuum freeze-drying ovens where precise sub-zero coolant is essential. Users needing only ambient or above-ambient circulation should look elsewhere.

5 L reservoir with -10 °C set-point

The unit holds five litres of heat-transfer fluid and can maintain a controlled temperature down to minus ten degrees Celsius with a stated precision of ±0.2 °C. A microcomputer controller and digital display handle set-point entry and monitoring. The pump delivers up to twenty litres per minute at a head of four to six metres.

Sustained refrigeration capacity of 1328–319 W

Under continuous load the compressor provides between 1328 and 319 watts of cooling power depending on the fluid temperature. The no-load minimum reaches minus fifteen degrees Celsius in a 25 °C, 60–80 % humidity environment. The steel-cased chassis measures 500 by 370 by 540 mm and operates on 110 V 60 Hz supply.

Highlights

  • Cools liquid to -10 °C for low-temperature reactions
  • 5 L reservoir supplies continuous circulation at 20 L/min
  • ±0.2 °C precision via microcomputer controller
  • 110 V 60 Hz power with built-in pump protection
  • Wooden-case packaging delivers in 7-14 working days

Specifications

TypeCooling Chiller
Temperature Range-10°C~RT
Capacity5L
Voltage110V

Questions about this item

How cold does the -10°C rating actually get in a real setup?

The unit reaches a no-load minimum of -15°C and maintains a working range down to -10°C with ±0.2°C precision.

What does the 20 L/min pump flow mean for my external circuit?

The circulation pump delivers 20 L/min at 4–6 m head, setting the practical flow limit for connected reactors or condensers.

Will the 500 × 370 × 540 mm footprint fit on my bench?

The chiller measures 500 mm wide, 370 mm deep and 540 mm high, so check bench clearance against those dimensions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.