HNZXIB
HNZXIB DLSB-10/10 -10°C 10L Laboratory Supply
A 10 L refrigerated circulator cools liquid to −10 °C with ±0.2 °C precision and delivers up to 20 L/min flow for rotary evaporators, jacketed reactors or vacuum pumps
- TypeCooling Chiller
- Temperature Range-10°C~RT
- Capacity10L
- Voltage220V
- Cools fluid to -10 °C for low-temperature reactions
- 10 L reservoir supports extended circulation runs
- Microcomputer controller with digital display simplifies operation
- Built-in protection safeguards connected equipment from coolant faults
- Refrigeration capacity of 1894 W delivers strong cooling power
Laboratory chiller for chemical reactions
The HNZXIB DLSB-10/10 is a 10L refrigerated circulator that delivers coolant down to -10°C for laboratory use. It connects to rotary evaporators, jacketed reactors, vacuum freeze-drying ovens and magnetic stirrers to maintain low-temperature conditions during chemical reactions or drug storage. The unit runs on 220V/50Hz power and uses a microcomputer controller with a digital display for straightforward operation.
Upgrade from basic ice baths or tap-water cooling
This chiller replaces improvised cooling methods that cannot hold a stable sub-ambient temperature. The jump is worth it when a process demands ±0.2°C precision across a -10°C to room-temperature range, or when a 20L/min flow rate with 4-6m lift is needed to circulate fluid through external apparatus. It also adds compressor protection that shuts the system down if coolant conditions become unsafe.
Sustained load behaviour with 1894W peak capacity
Under continuous operation the refrigeration system provides up to 1894W of cooling capacity, falling to 884W as the fluid approaches its lowest temperature. The no-load minimum reaches -14°C in a 25°C ambient environment with 60-80% humidity and ventilation. The 10L reservoir buffers thermal spikes, while the compressor and key components are specified for reliable performance during extended runs.
Highlights
- Cools fluid to -10 °C for low-temperature reactions
- 10 L reservoir supports extended circulation runs
- Microcomputer controller with digital display simplifies operation
- Built-in protection safeguards connected equipment from coolant faults
- Refrigeration capacity of 1894 W delivers strong cooling power
Specifications
| Type | Cooling Chiller |
|---|---|
| Temperature Range | -10°C~RT |
| Capacity | 10L |
| Voltage | 220V |
Questions about this item
What are the machine dimensions for bench placement?
The unit measures 500 mm wide, 400 mm deep and 650 mm high, so allow that footprint plus clearance for ventilation.
How is the circulator connected to external equipment and what step is often missed?
Connect the inlet and outlet ports to your reactor or evaporator with suitable tubing, then prime the 10 L reservoir before starting the pump to avoid dry running.
What maintenance does the refrigeration system need over time?
Clean the condenser fins regularly to maintain the 1894–884 W cooling capacity and check coolant level and condition before each use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



