We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Industrial CO₂ supercritical extraction unit, stainless steel frame, pressure vessels, control panel

HNZXIB

HNZXIB CO2 Supercritical Extraction Equipment 500bar 80°C 220V

SKU CH-B0K2-18DJ8

High-efficiency supercritical CO₂ extraction system operates at up to 500 bar and 80 °C on 220 V power

  • TypeSFE(Supercritical fluid extractions)
  • Voltage220V
  • High-purity extraction without solvent residue backed by CO2 insolubility in organic solvents
  • Selective enrichment of target compounds enabled by supercritical CO2 solubility characteristics
  • Natural active ingredients preserved through low-temperature operation up to 80°C
  • Clean separation of extract and CO2 achieved by pressure and temperature changes
  • Zero waste discharge of exhaust gas, residue, or wastewater in the extraction process

CO2 Supercritical Extraction System

The HNZXIB CO2 Supercritical Extraction Equipment is built for laboratory and industrial applications that demand high-purity separation without organic solvents. It targets researchers and producers working with heat-sensitive natural compounds who require a contamination-free process. The system operates in intermittent or continuous modes to extract from solid or liquid raw materials.

500 bar Pressure Vessel With Dual Separators

The solid extractor is rated for a maximum working pressure of 500 bar and a peak temperature of 80 °C, with pressure vessels designed to national standards and fitted with over-pressure protection valves. A single extractor feeds two separators, allowing fractionation by adjusting pressure and temperature parameters. The wooden case packaging supports safe transit for the assembled unit.

Non-Polar Solvent Limits At 250 g/mol

CO2 acts as an apolar solvent, giving high solubility for non-polar and low-polar substances up to a molecular weight of 250 g/mol, while highly polar substances remain insoluble. Separation relies on parameter shifts or adsorption into media such as active coal, which restricts throughput for polar target molecules. The 220 V supply requirement defines the installation environment.

Highlights

  • High-purity extraction without solvent residue backed by CO2 insolubility in organic solvents
  • Selective enrichment of target compounds enabled by supercritical CO2 solubility characteristics
  • Natural active ingredients preserved through low-temperature operation up to 80°C
  • Clean separation of extract and CO2 achieved by pressure and temperature changes
  • Zero waste discharge of exhaust gas, residue, or wastewater in the extraction process

Specifications

TypeSFE(Supercritical fluid extractions)
Voltage220V

Questions about this item

What does the 500 bar maximum working pressure cap in practice?

The 500 bar limit caps the highest pressure the solid extractor vessel can safely reach during supercritical CO2 extraction runs.

What physical provision does the 220 V supply need for this equipment?

The system requires a 220 V electrical connection; the wooden shipping case must be removed before positioning the unit on a level floor.

How is the over-pressure protection system installed and what step is often missed?

Safety valves are factory-fitted to each pressure vessel; the step often missed is verifying every valve operates freely before the first pressurisation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.